Search results for query: *

I believe my issues are solved. Thank you again. I really appreciate your help. Great site!

Thank you. That solved my issue. It's setup to transfer to extension 10 from the greeting but there does not appear to be a mailbox setup for 10. When I go into VM admin to assign a voicemail it ask for a mailbox number. Not sure what that number would be ?

Hi to all. I'm helping a friend on a Partner ACS 3.0 with a Partner Voice Messaging PC card R 2.0.1. System lost power and batteries were dead. Have sense replaced. Biggest problem is all calls are being picked up by the AA. From reading this site, I have done the #505 for port 78 and 79...

Good day. I have confirmed that set relocation is off. I can dial extensions with no problem but if i press 9, i am just getting the fast busy. In maintenance, shows as a m7100.

I will try that but when i plug a 7316 into the port i have no problem making outbound call after hitting 9.

Yes, it is a Norstar Conferencing unit. 2501-03308-001. Extension is programmed to dial 9. I have2 i/c 's assigned, hf answerback at no, prime line is intecom. Have dial tone but busy signal as soon as i hit 9. Can do some programming just unsure what am not doing.

It is a Norstar Polycom and suppose to run off Norstar port. I do not have an ATA. I get dial tone but when i press 9for outbound call i get the fast busy. I've been using a 7310 at the same extension.

I have a used Norstar Polycom conference phone that is suppose to work as a direct connect. We have a 0x32 Mics. Can someone please tell me how to configure? I have dial tone but get a fast busy anytime i try to make outbound call. Any help is greatly appreciated

Added 2 new stations with 2 dedicated lines, do not want to add these stations or lines to AA The 2 lines are programmed to ring only on these 2 stations and both have mailboxes set up. Would like to prgoram the lines so that if there is no answer, it will go to the voicemail of one of these 2...

i believe i just figured it out and it seems to be working. now to fine tune it. thank you very much for the help and advice. you guys are really great!

when setting up the paths, after i input 1 for path, please tell me how to direct it to the appropriate extension path 1 (how to set transfer to extension) thanks

im trying to keep a very simple message and have 1 greeting that plays all time for the 3 options, i only want to direct caller to an extension 1 for sales -> extension 225 2 for acctg -. extension 227 3 for consulting -> extension 225 once they select option, i simply want to ring that...

there are currently no trees built so would I still need to disable? also, when I go into admin, select ccr tree, build, get through prompts, its ask me for path I have 3 depts. I like to have single digit path too press: 1-acctg 2-sales 3-consulting 4-general mailbox not sure what I should...

wonderful site i want to build a ccr tree with 4 options: press 1 for sales, 2- accounting, 3- hr, 4- general delivery i would greatly appreciate any guidance have never set up one of these but somewhat familiar with these startalk flash voicemail

I want to reconnect the Startalk voicemail to the Mics. When i took this system out of a closed building, i noticed there appeared to be 2 lines directly plugged into front of the voicemail. Would i need to connect my main 2 lines to this startalk? Im pretty sure i can program alot of the...

Thanks guys. Got it going. Now if i could move the third line number to the left column of buttons on the 7316's in line with the others that should help me out much

good day. i have 0x32 that i removed from an old office and put up in our office. the previous office used a trunk module in addition to the system. i only have 3 lines so i am assuming i dont need a trunk module? i have system up and running with 2 lines, but i cannot get a third line to work...

I have a CP100. Im trying to change one of my auto-attendant greetings but when i listen to current message and try to erase and re-record, i get a message indicating out of space. I'm lost

I have to replace a faulty 0x16 station module - used with 0x32. My goal is to keep the same DN's/extensions. I'm somewhat familiar with programming the MICS, but have never changed out a station module. I'd appreciate any guidance. Thank you