Hello, does anyone here have experience with comcash. I have reinstalled their system and configured a lot of things on it. Seems like other point of sales. However I am running into an issue where it says out of memory when printing a regular receipt. This location is a high traffic shop and it...
I always run a file server on a separate computer. Makes it easier to manage data, run reports and Configure the system. Running them on a Terminal is possible, Look at step 3. It has the option to Run both FOH and BOH. I have never done this, so I cannot comment on that. I always think that no...
Yes I have the ISO. Yet it is for the Version stated in the tutorial. As far as starting from Scratch. I would assume. Fresh Windows Install and New Aloha Install. If that is the case. Make a Strong Password for Administrator and store it well. Make sure you Preconfigure the workgroup and it...
Here is a Link to a tutorial I had Made. It is half way done. Yet I will try and work on the Second part. Yet with this Part 1 of 2. You should get Aloha Working. I am also going to post on how to create menu's, submenu's and Configuring basics for Aloha.
Aloha Install/Re-install
I have one loaded for that. Yet it is pre programmed to my setup. I can walk you through how to change the info. Yet they are pretty easy to modify to fit your needs. As far as a password. I have the images setup and they autoload. You can edit that and require a user name and password at log...
I do not have the CD for this Version. Yet I can help you re-install Aloha and configuring menus. They are a little different than those POS systems I usually work on, yet just an extra step or two on top.
Unfortunately, you can only Delete it in Aloha for that message to disappear. You will not loose the license for that station yet maybe just the configuration. I had the same issue and was only able to get rid of that message by deleting it inside Aloha. I kept the configuration written down...
Here is also a Direct Copy from that P1220-0153 with XPe. This one has the IP set to static and Station 12 PC Name. Change that accordingly and the path to your Aloha BOH in the Ibercfg.bat File under c:/Aloha/. OR If you wish. Stop Aloha Services. Delete C:/Aloha and proceed to change the...
I used them on a P1220-0153 and it loaded the P1220-0827CAP.gho Image fine. I did not realize they had Windows Embedded Standard on Them. Did you try that one or another Image as I have 4 Images for the P1220 on that link. Secondly I used an Image disk I had used back in the day for Converting...
So My question is easy as it seems yet a little bit harder in the BOH setup. I have a customer who wants to setup lets say a Margarita. Based on the following :
Lets say the margarita cost $3.00. He wants it to separate $0.75 or what not as the Margarita Mix. Which in turn in a soft drink item...
Does the driver show up under the Device Manager ? My P1220 shows it under there as P15xx Drivers and has the MSR and Touch Screen plus other Drivers. If so I can link the Driver files and will see if that helps.
I have a File server with images to my Registers. They are P1220's and can be loaded from PXE boot. Instructions are shown or you can just grab the .gho image and load it from Norton Ghost. It is However Windows XPE.
http://pos-techs.com/POS/
What model P1210 is it ? I have the P1220 and it uses some type of Touch sensor drivers. Yet I do not know what they are. I got these off my File server and it was in the Pxe Folder. Give them a try. The folder I have in the Registers states P15xx and then it goes from there. The drivers are in...
Right after posting my issue on this just a couple of hours ago. I tried something else. I deleted all Aloha Folders in the Registers and Ibercfg.bat file. Ran Term Install and it did a reboot. I had all other 4 register off when doing this (we have 5). I then run a Credit card and Boom, runs...
What I was saying is that it is a new File Server Install. Old Registers with Software untouched. Copied all the parameters of the old FS such as Domain, name etc...
Credit cards run yet they say they are being processed offline. 2 Seconds later, EDC in the FS shows the transaction. I checked...
I am not sure how to word this but here it goes. I did a re-install to a System Created Admin user and password. Installed Aloha TS and EDC and used the credentials for the Server I head created. Now the FOH is from the previous HDD and they stayed intact. We just began to have issues with...
Well today was a new Day and I went ahead and did an Entire Windows Reload and just ran the CD with defaults. Everything works now. Thanks for the tip on the User name and password thing, that may have been why it failed the first time as we did not have a password set. Yet I found an error in...
So I am a POS Tech in need of help. I am used to a FS running shared data and then the other machines communicate to the FS. Installs are pretty easy and straight forward.
I have done OnePOS, PixelPoint, Digital Dinning and today I am with Aloha. I have the CD Image that I found here. I install...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.