Search results for query: *

With the help of some of you, I went from knowing nothing to knowing enough to make it work. The system is up and running. have some issues,but I do have dialing at the extension. My test line I placed in a COS by itself. Not sure what caused it, but when calling from it, the call errors out at...

I do not use the E series. I don't think that is for the states. The -6 and -7 are exactly the same except they provided a Caller ID card in the -7. Most re-sellers take them out. Let me check around the web and see if I can find that version for you.

CartoonX, I am good with all that. I have the latest -7 firmware which is the same as -6. I always buy -7 even without the caller ID card because they were the latest produced. I do use programator, and have for almost 20 years. I have never had an issue with it causing a mess. If you want to...

the CO is not assigned to the phone. Also you must have the phone set to ring on the CO in order to get caller ID. The CO not assigned has nothing to do with the caller ID cards.

Thanks for the reply. Brad

Hi guys. Was at the site yeasterday, was able to get more intimate with the unit. It would boot to #42 on the scanner card. I do show a major and minor alarm. I have a err coded E021-20-001-000 On the console. The idea of it being in power tail mode dropped whan I saw the card there and not even...

I disagree with you CartoonX, the 308 is 3 outside lines and 8 max extensions. a 616 and a 624 are totally different. He needs to update the guys system to an 8x24 that comes 4x8 base package. the numbers showed max configuration with the first number in a 3 digit cabinet as the max number of...

I purchased a copy of Hyperterm. You can copy hyperterm from XP over to win 7 as well. Run it in compatability mode. You may also be able to get a copy of procomm plus on the web. I think it is a norton product now. oh yea, change out those older units to TVA 50's, you will be happier and so...

Hi Jpruder. Remember I have a head of cobwebs right now with this thing going back 40 years or so. I can hunt through the books, but can you provide a little more info on the init so I do it right. Good chance its all clear now, the battery pack was removed with the card out. Is the init you are...

I was able to get a chip for the 1232. What I would like to know is other than adding the chip, 1. do I need to reload the cabinet after placing the chip. It's a double cabinet unit. 2. Is there any programming that needs to be done. 3. Does anyone know of the docs for the procedure of putting...

You can check the ringer switch on the side of the phone. You never said if the intercom rang or not. Do not parallel the extensions. The 824 is an analog system and the PT phone needs all 4 wires to operate. I stay away from 824's like the plague but I will ask does the programming say 101-1...

I want to thank you guys for your help. I also would like to thank the Mitel Guru I contacted who happened to be in the area of the Motel and stopped in and got the console working. That's a plus. I am going tomorrow to see what else I can do with it as there is no dial tone at any of the...

Thanks for the quick replies. I tried pulling all cards other than the ones to the far right, battery card, console card etc. basically they were station cards and still no go. I go along with the batteries being dead, but would there not be dial tone on the extensions by default? I can get and...

Hi everyone, I have a customer who has a sx200 he says got hit with a power surge. I tried a restart, no go. The console shows a minor alarm and no clock data. The system has no dial tone at any extensions, but I do have talk battery. This should be more than a minor alarm I would think. Next...

Tommy, Thank you very much. With all my years of telephone know how,this system is probably the worst one I have ever dealt with. It also was never kept up either. If I can ever help you with anything that I know like mainly Panasonic, please let me know. I am also a radio and electronics type...

Heh Tommy, if it's not too much trouble, can you send me the steps via the console? Is this a per extension feature or a blanket that once turned on it's available all over. There is one extension that does ring a few times then goes to the cell phone. That is the guys other extension. I am...

Ok, guys here is the scoop. It turns out they were attempting to forward the extension. The 1 or 0 recording is the phone company recording. I shut that off and the phone rings and goes to internal voice mail. Now the guy wants to forward the extension to his cell phone after a few rings because...

Thanks Tommy, I will try that. going to head there today. Brad

Well here we go again. My only customer with this merlin box that I really hate. So the customer calls and says all of a sudden when someone calls extension 523, it goes to a recording to dial a 1 or 0. My knowledge would say we have a error in call forward. problem is I know so little about...

I purchased a sunset on line for about $75.00 to handle this kind of issue. As a 5ESS tech my self, The one thing we always needed to do was to restore the D channel in the switch. When it is first brought up, it is in CADN type mode. We would restore it to an OOS condition. It would then come...