Search results for query: *

Once you get into the network configuration, press the button below Auto on the screen, then press the button bellow ALLMAN on the screen. Use the RH scroll arrow to step thru the fields.

Once you switch to the PRI, I assume you would have a published main number and also your 800 number. For the main number and also the 800, which I assume you are porting to your PRI, you would have a Public DN for each with those target lines assigned to each of them. You could either assign...

It could be a difference in the Pin-Out usage on the network ports on the two different switches.

You can get a license that will allow it but it is very costly--cheaper to purchase the license you need for the BCM in question.

Make sure you have the latest patches installed--there was a problem with RAID that was fixed with a patch.

Cxtec in Syracuse NY, and also Black Box Network Services--both sell refurb, Cxtec has lifetime warranty.

Look for Application Resources, and under that, look for IP Client settings. It's been quite a while since I have used Unified manager, as I am on Element Manager for the updated systems we have.

Previous to hardware/software upgrade, BCM was 400 version 4, and ASM Media Bay module worked fine. After hardware/software upgrade to 450 v6, I cannot get the ASM to Enable. Tried changing physical bay location, and tried various DIP switch settings. I have applied the...

It just occurred to me--in your Resources, the Maximum for IP Client under Application resources is probably set at 3 instead of MAX.

No Ports Left refers to licensing. You will need an IP client license for each IP device you have connected. If you have an IP device that is registered with the BCM which is not used, you can Deregister it to free up that license.