Search results for query: *

Hi Belevedere, Thank you for your reply. I'm attempting to modify a default setting that can't be changed in PC Pro. I'm aware of a way to do this using the debug terminal however haven't quite got there yet. It is a pretty tightly kept secret!

Hi, please can anybody shed some light on what commands I would need to use to change programming data using the SV8100 Debug Terminal. I am along the right lines of using PRGINFO DEBUG or would it be SYSDATA? If so where do I then go from there? Help is appreciated!

I'm glad you got it sorted! I assumed that this had already been done. At least you know for next time. Good luck coming across a Cisco Firewall to carry this task ... [thumbsup2]

Are you forward the correct RTP ports to the VoIP resources address? Also you should ask the carrier if they require network mode as this may be the reason.

I'm pretty sure that the NAPT Licence only works with the DT series of handsets as the handsets web server handles part of the NAT traversal. You also require port forwarding to be setup on the site where the PBX lies to tell the traffic to go to the IP address of the CCU. Have you set this up yet?

I have successfully set up 3rd Party SIP devices however it is very reliant upon the network/wifi connection. Can you please confirm you have enabled this IP extension and have created within the port range of the IP? Also, try using 3CX alternatively just to see if the extension is working.

Hi thank you for all the responses. After the 60 day trial has finished, can you then still use the 30 day licence from the LMS? I know there is certainly a way to reset the 60 day trial. It is most certainly kept low key though!

Hi All, I'm in a little predicament. Following a recent replacement of the SV and uploading settings etc I had forgot to load the licence files. It never crossed my mind due to the urgency of the situation. You've probably guessed it ... the 60 day trial has now expired. I know there is a way...

Hi, I'm deploying an SV8100 with over 100 extensions next week. Is there any way I can very quickly program all of the IP handsets? Previously I have gone round each phone and entered the extension number and sip settings etc however, I believe there is some sort of script that can be ran...

Thanks for all your help. I managed to get the override password from NEC the following day. I will not post here however if needed please PM me.

Hi, I have just installed MyCalls Version 4 and have created 2 users of which both were admins. However I have mistakenly give each login Basic call control on the user account, now every time I try to login with either it says I don't have the licence. What can I do? Is there some sort of...

MontyZummer ... I will try the Wireshark route. How do you configure the program to filter certain IP's though? and the external connection?

I have a set of manuals but I don't think they are the correct ones. Is it possible you could just briefly outline the steps? Yes I have the maintenance console. Licensed for 4 x SIP Trunks.

System is Panasonic NCP500 with DSP4 card.

Can somebody please tell me the process to programming a SIP trunk and where I type in the info. I have been provided with a: Hostname Username Password Thank you.

Can you explain more on how to do this please? As from what I have done, it's already done.

I have also done this but without luck. Any more suggestions?

Thanks for the response. I can't set up a VPN as it would mean changing every users router. This can't be done. I have managed to get the phone working but just no speech. Does anybody know if there is an extra port that needs to be open for the speech protocol? This can be done without a VPN I...

I have connected an NT343 handset from my home to the office NCP500 pbx. I have the phone up and running. I can use all the keys and program the system form the handset but ... I can't hear any sound. When I pick up the phone I get an internal dial tone but as soon as I pick up an external line...