Search results for query: *

Checked ports ok and reboot did it, Thanks again

Thank You

Thank You, I will check.

Hello,I moved a Nortel 0/32 with a call pilot 100, after the move the call pilot does not answer in night service or at all. Can someone give me an idea how to fix? Thank You

Replaced the VM with a 4.1 which I should have done originally but got in a hurry for the customer, live and learn. All is fine. Thank You

Okay, I'll give you the last word.

I think you are right maybe you should bow out, reading these questions thoroughly is half the battle. I mentioned the original NAM was a 4.1 twice. Maybe you might want to come down from your high horse and stop berating people as to their knowledge. Thanks anyway

If you read my second post I stated the original NAM was 4.1. If I could have gotten hold of a 4.1 I would have, I needed it fast. For the most part I do know what I am doing and I did ask about this and was advised incorrectly. That's why I tried here, but you still did not answer my question...

The NAM I replaced was a 4.1, maybe the problem is I restored to a 4.0? Maybe if I get a 4.1 and restore the data to it, it will work? Should't the 4.1 already have redirect DN in it? Thanks

Maybe I should find a 4.1?

Okay Thanks. How would go about installing it on the NAM?

Also the old NAM I replaced was a 4.1 model.

I replaced a NAM on 0x32 and installed the data from backup disks to the replacement NAM and all data seems to be there. Now when you call in and the attendant transfers the call to an extension the phone rings 4 times and then the main greeting plays if the call is not answered and does not go...

Thanks for the reply, after I posted this I realized how the paging issue could be resolved. The carrier, AT&T told the customer that they could not do that because the lines were analog POTS lines? I will investigate further about lines, just wanted to make sure that the MICS wasn't able to...

MiCS 0x32 5.0, is there any way with this software and POTS lines to enable outbound caller ID to display their main number from all lines that the users call from? Also, is there any way to have certain areas receive pages through the phone only under specific circumstances and not hear the...

Reprogrammed all target lines as needed and line assignments to reception. Changed their main number to target line 121 and got rid of old programming, made 121 private to reception and changed back to public. Assigned target line 121 to reception for ring only. Main line is now answered by...

Okay Thanks

Thanks for the info it will be a few days before I can get back out there. In your last item on the list of things to do you say to remove the target line from reception? I thought the target line for their main number needed to be assigned to ring only at the reception phone for answering?

Went back out to this site and did a NAM reboot. Right mow the system is answered by the GD mailbox as a message center, I checked on inbound ringing lines and the display says line 003 through 013 randomly. I assigned lines 001 through 023 on the voice mail to answer yes. table one, rings 5...

Target line 121 is not the main number and is set to ring only, there is no line display on incoming call. I will check on other things when I go back. Thanks very much for your help.