Search results for query: *

I have just installed a Mitel Phone Manager 5.0 which is connected to a Mitel 5000 6.2, I have the phone manager talking to the 5000 and have imported all the extensions, however when I try and connect with the desktop client it tells me "unable to create a session as the username and password...

Hi, I am working on a Mitel 5000/ Mivoice Office 250 6.2 and am wondering if there is a way to set an alert tone for the paging? The customer had a Nortel before and liked the alert tone before the page. I am just paging speakers and sets. Thank you in advance

This is all set correctly, I am still getting double ring but the siren is answering,I am at a loss for the double ring

I am working on a Mitel 3300 that has a DID pointed to an emergency siren, however the double ring of the 3300 is not allowing the siren to answer. I am assuming it is looking at the double ring as a busy like a fax machine would. What I am looking to do is get rid of the double ring the system...

Ext 2345 works with 123-4567 as DEE for incoming PRI and station to station calls(will ring station and cell) Ext 2345 works with 000-0000 as DEE only for station to station but not on incoming PRI (the cell never rings) When I go to call activity and watch the calls everything looks...

As far as a known working number do you just mean another extension? As far as config errors are you talking programming issues?

I am looking for some insight on Mitel 5000 DEE troubles, I have a Mitel 5000 6.0, licensed for DEE with a PRI and DID, primarily using 8568 phones with a few IPs. I am having an issue with certain cell phone numbers that I program in DEE, certain 7 digit numbers I program in and they work fine...

The Viking unit I am using is a Viking RAD 1A, the reason I cannot go directly off the 5000 is the paging is at a different building, hence the reason I need to go from IP to analog

Hi I am looking for some help and guidance on installing a paging setup with a Mitel 5000. Here is what I have a Mitel 5000, a Cisco SPA122 ATA and a Viking unit( sorry I do not have the model, I will add it Monday when back at work) I need to go from IP to analog for a Page Zone which I am...

We had to set the phones as teleworker phones on the set and put the MBG ip in and all is working. Not sure if something was not set up right initially in MBG or what but the installer password never came up...........Thanks for all the help

Thank you for that answer, I also got that info from someone else yesterday and am trying it this morning and will let you know. I had to add the installer password yesterday as it was not in MBG. I am not quite sure how the previous techs had installed these phones originally as they have been...

Actually my apologies, in vMCD1 it is a 5340E, physically it is a 5340E, but in MBG it just shows as 5340. Would that make a difference? Can you change that to 5340E in MGB? I dont see anywhere you can change it or doesnt it matter?

Yes that was done and everything looks correct

Hi I have Mitel Border Gateway running on MAS 5.0.116.0 and have 8 MiNet devices working, which are 5330 and 5340 IP phones. I replaced 3 of the phones and now they wont connect to vMCD1, my main 3300 controller. Under the Current ICP column it shows unknown and a red X in the connected column...

Hi I will start out with the pertinent equipment and version we have , then ask my question. Oaisys Recording Software V. 7.1 Mitel Applications Suite 5.0.116.0 Mitel Standard Linux 10.0.43 MCD 6.0 SP2 (Virtual MCD 3300) On the Oaisys side we have 8 ports in the recording manager, 3 of them...

Thank you very much and removing the DND was what we had done in the interim, just always looking at the other options...............Thank you again

I have a Mitel 3300 Release 6.0 SP2 and was wondering if there is a maintenance command to override DND on a 5330/5340 phone if someone has inadvertanly put it in did not realizing it. I tried the override key on a set in my office and changed COS etc, but it appears since the set goes to...

Just an FYI ClearOne Max Analog Conference phone works great on the Mitel 3000 and has an unbelievable wireless range

3000

I have a customer that has a Mitel 3000 and wants a conference phone, dos anyone know if the Polycom 6000 or Polycom Soundstation Duo will work? Or any other suggestions would be greatly appreciated....Thanks in advance, Lee