Search results for query: *

Anyone who can help please?

Hallo Experts, I'm seeking out assistance on Number presentation from these two networked systems. The 2 are networked via QSIG with the MD110 being the primary/master where all external E1 trunk boards reside. Problem is, calling externally from the CUCM extensions does not send out the...

Hi Everyone, I have a problem dumping to REL2. Every DUSYI I run seems to be delivered to REL1. Infact, printout of dubdp shows REL2 is oddly stuck at a later date that is not yet reached as below(Today is 4th SEP). I also have alarm 101 FAULTY CLOCK PROCESSOR. What is the medicine for this...

doktor, it's a mix of digital and analog. ADC 00120013010000 and 010001301 respectively set to send digits.

doktor, CLIP-SA is enabled on the ISDN according to the provider. On the MD110, route ADC is set as 100500000000025000000110000. Note D22/D23 is set to 11, but still it doesn't work. What other configuration should i adapt?

Hi guys, I have forwarded all calls to an extension using the repeated deflection command PELPI to an external mobile number. It however has presented me with a problem. The receiver on the mobile number sees the calling number as own extension number that has got the pelpi enabled, instead...

Hi everyone, I need help in setting up CIL for incoming calls to a hunt group. I need to record calls coming to a particular hunt group only. Does anyone know how to go about this?

Hallo, I have a tieline between an Ericsson MD110 and BP250 by IP Trunk. Users at the BP250 call externally by using PSTN lines connected to the MD110. This is done by having the extensions at the BP250 programmed as Virtual extensions. They dial a 0 and pick up an external ISDN line located at...

Hallo, I have a tieline between an Ericsson MD110 and BP250 by IP Trunk. Users at the BP250 call externally by using PSTN lines connected to the MD110. This is done by having the extensions at the BP250 programmed as Virtual extensions. They dial a 0 and pick up an external ISDN line located at...

Hi vkrt, i have made the change on config file, but problem persists. doesnt resolve the problem. any other suggestion?

vkrt, where is that done, is it on RODDI?

Hi all, I have a TSW configured for voip using IPLU to Alcatel Omni pbx. I can place and terminate calls both ways without an issue. Problem is, the caller on the TSW cannot hear what the person on the other side is saying - hence voice transmission is only one way. Does anyone know what...

Hi All, I have networked a BP250 & Cisco call manager 9.0. Calling between the two systems works fine. However, only the calling/called number is shown on screen of the parties, the name is not presented. Does anyone know what to configure on the BP250 or call manager to have the name...

Hi, I have networked a BP250 & Cisco call manager 9.0. Calling between the two systems works fine. However, only the calling/called number is shown on screen of the parties, the name is not presented. Does anyone know what to configure on the BP250 or call manager to have the name...

Hi Satellite1900and fcpli, you advice works. I found the magic with SEL=113000, CDINI 3555 to 3555 and que=0. Now, callers who call when all the members are busy or unavalable get a busy tone without being taken to the operators - just what i wanted/ Thanks and have a great weekend!

Hi, Someone please assist. I have initiated a hunt group number 3555 with group members 3401, 3402 & 3403. GHGRI:GRP=3555,SERV=11010,TRAF=15,SEL=112000,QUE=10,LIM=1; Problem is when all the you call 3555 and all group members are busy or not aswering, the calls are deflected back to the...

Hi, Does anyone know if third party sip phones can work on the MX-One TS with sip. Specifically, am looking to connect the cisco 7965G to the system and am having trouble making it work. Has anyone done this successfully?

Hello all, Does anyone know how to solve this? I have an integrated voice mail system on MD110 BC13 that hangs often. I want to clean it and reinitiate without formatting. I have removed the voice mail from all extensions with IVBOE, but still i see that 31 mail box licenses are being used when...

Belyaev, many thanks. It works like magic! Teenu2, in RODDI change the first parameter in ADC to 1. Then define min and max number length with NANLS:EXL= ,MIN= ,MAX= ;

Hi all, I have a BP250 connecting to ISDN PRI. I can receive calls but i cant make outgoing calls. Problem is, the local telco service provider says am sending single digits at a time to his switch and therefore they cannot terminate my calls. The provider says i must send all the dialled...