Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Cisco 4506 Uplink GBIC Port Question
Yes, make sure you configure these links as trunks and that VTP and spanning tree is setup correctly. Thanks, Joe http://certificationchat.com -
flash question
You can also delete the ipbase image and reboot. Please verify that your config register is set correctly and that you dont have any boot statments in your configurations. Thanks, Joe http://certificationchat.com -
QoS on Cisco 887
Do you have a dialer interface that is attached to your ATM0 interface? Do you have a VPN tunnel on this interface? Please attached your entire configuration. Thanks, Joe http://certificationchat.com -
route selection for a host
Yes, policy routing will allow you to do this. Thanks, Joe http://certificationchat.com -
Cisco 1841 Master/Slave help
Post your configuration and a show version so I can see what T1 cards you have. Thanks, Joe http://certificationchat.com -
VPN MTU Issue
ip mtu 1440 - adjusts the mtu on traffic terminating on the router. ip adjust-mss 1452 - adjusts the mtu on traffic flowing through the router. Thanks, Joe http://certificationchat.com -
Cisco 1841 Master/Slave help
This should be related to clocking. By default, the router is set to line (slave) clocking. Thanks, Joe http://Certificationchat.com -
VPN MTU Issue
Add this to your LAN interface, ip adjust-mss 1452. This will reduce the mtu to take into account the DSL overhead. Thanks, Joe http://certificationchat.com -
871 downloads get slower and slower
Try to disable http and https inspection. I have seen this issue many times and disabling this feature always helps. I believe there is a know bug with http/https inspection where is slows down over time. Thanks, Joe http://certificationchat.com
