Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. chelmik12

    Nupoint 6.0

    Call director then mailbox, the mailbox greeting playing twice
  2. chelmik12

    Nupoint 6.0

    mailbox is playing the greeting twice sporatically nupoint is 6.0 MSL is 10. outside callers are here the mailbox greeting twice we have changed the fcos no change rerecorded the greeting no change taken out the mailbox and put back in no change any thoughts?
  3. chelmik12

    Licensing a 3300 MXE running 6.0

    What is the procedure to add licenses to a controller that has no access to the internet using the software installer tool? we used to use our laptops as the gateway and take the controller off line the network, butr we cannot take the unit off the network during regular hours?
  4. chelmik12

    Wakeup calls on a 3300 or 200 icp

    the wake up call is being set at the console and the the room is just going to ring
  5. chelmik12

    Wakeup calls on a 3300 or 200 icp

    How many wake up calls will the controller do at one time? Eg. if i set 25 wakeup calls for say 7am and have 20 ports for vmail how many rooms will get a call at 7am?
  6. chelmik12

    BLF on a 3300

    we have a customer with a BLF on a 5340 set, and she would like the blf not to flash when the monitored set is in DND, Cannot find and documentation saying that it can be turned off for DND any thoghts
  7. chelmik12

    Ip phones downloads after fail over

    The IP Phone is on the Primary controller running Release 7.1 because of Nice Recording Software, the set fails over to the Secondary controller running Release 4.0 SP3. The set will download the new firmware from the 4.0 SP3 secondary controller, when it fails back to the Primary controller...
  8. chelmik12

    3300 MXE Music on Hold between sites

    We are going to deploy two sites in a cluster, when switch B calls overflow to switch A, when switch A puts the call on hold from switch B they want customer to hear the music on hold from Switch B is it possible?
  9. chelmik12

    MCD 3300 Telephone Directory

    yes it shows both names
  10. chelmik12

    MCD 3300 Telephone Directory

    I make a second entry for a existing user and extension in the telephone directory and save it, then i check the user and devices form and the switch repopulates this form with this new entry and the existing one Any body noticed this, I am running 5.0 sp2 pr1
  11. chelmik12

    200 Icp non prime number going out on PRI

    I am trying to Display a non prime extension to the outside world but the outgoing always follows the prime number CPN number any thoughts?
  12. chelmik12

    Nupoint Vmail

    One user getting when trying to access there mailbox getting "mailbox in use try again later" any thoughts as to why the mailbox would be use other than recieving a message
  13. chelmik12

    200 Icp Name Display on PRI

    Is there a way to display a default name on a 200 icp on PRI other than what is in form 9
  14. chelmik12

    How to change IVR greeting on SX200

    do you mean the auto attendant if so go thru mailbox 999
  15. chelmik12

    SX200 ICP GTD

    Check your form 22 some times by inserting *6 will work if you follow the tech hand book for pri installing it should work fine
  16. chelmik12

    PRI Showing Not Seizable

    Have a mitel 3300MXE running 4.1 Embeded PRi trunking through a GTD 5, every so often the trunks are not seizable only way to fix is reboot the controller Have changed the T1/E1 card clocking card no difference, anybody seen simular problem Thanks
  17. chelmik12

    Enable sending of DDI on external calls

    are cpn tables filled out

Part and Inventory Search

Back
Top