Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. boristhespider2

    Azure /intune/Cloud

    Anybody got any examples of where to go to for Cloud issues and azure , my knowledge is building but finding a forum host that is as "and old friend " like TT?
  2. boristhespider2

    Home Lab using G350

    You have also said that your MGC is a S8300B , this is not supported on CM 6 so this could well be your issue.
  3. boristhespider2

    Home Lab using G350

    have you put the serial number of the gateway in your add media-gateway x on screen 1 in CM, you obtain this from "show system" command on the gateway ,it sounds like you have done already but you need to save trans all and reset sys 4 from CM
  4. boristhespider2

    Incoming Calls Based on Time

    Using a night service button , or time of day routing in a vector ,
  5. boristhespider2

    Help adding in new VLAN for 4600 phones

    When you say that it is not practical to have the PBX and the phones in the same vlan ....why ??? if they are on the same physical geographic site it makes total sense to have Voice on vlan 1 and data on vlan 2 , could you explain your reasoning further as I don't want to miss something obvious.
  6. boristhespider2

    Setup For Disconnect Call After Few Min

    look at short codes .t(10)
  7. boristhespider2

    CMG Major Alarms - Platform Alarms

    try the alarm filter from the SMI of CM , that tends to give a little more information and as already stated hopefully an ip
  8. boristhespider2

    Avaya IPO SIP trunks

    This depends on your sip provider some support it and some dont , what do you see in a monitor trace when the call is re-directed ?
  9. boristhespider2

    Connecting 2 IP Office 500 V2 with out VPN

    You dont need a vpn just connect them in to the same lan and configure like any other SCN
  10. boristhespider2

    calls are not redirecting to queue agents logged in are in AUX state

    You need to give the agents a auto-in button in a state of Aux they will never receive a call.Also to keep it tidy you want step 9 to goto step 2 rather than 7, to ensure your routing logic stays active in case of emergency etc.
  11. boristhespider2

    Build an Avaya home Lab

    the gate way provides a service called sls(hardware vintage dependant) , this is very basic functionality not really what you are looking for in a lab environment , obviously if you use a separate server you can go down the EXSI route that peter suggests or install the CM template on system...
  12. boristhespider2

    How to find handoff type

    In answer to your other question the IPO will work with the connection they are presenting as T1(24 channels) with your existing T1 card........this is going to sound like a spanner in the works but if this is all about cost saving , you may well want to look at SIP trunks going forward you will...
  13. boristhespider2

    How to find handoff type

    well that is unfortunately a common theme , pay particular attention too what amriddle mentions regarding fax as this will fail , look at setting up a fax to email service or a traditional separate analogue trunk for this service you do have the cards to achieve this presently.
  14. boristhespider2

    How to find handoff type

    The circuit you mention with 24 concurrent calls is a T1(Primary rate interface) this is a integrated services digital network circuit or ISDN , this will need a t1 daughter board sat on a station or VCM card. The four analogue line card you talk about will not facilitate fax machines or...
  15. boristhespider2

    Build an Avaya home Lab

    you nee the cm forum , but this will stay fully licensed for 30 days . have a look at this link...
  16. boristhespider2

    ISDN PRI

    Sorry wrong post wmainc is giving you the correct advise
  17. boristhespider2

    ISDN PRI

    with Spain being in Europe you will want the etsi protocol on your trunk and sig group form on supplementary services this will be C , i know this from experience(bitter experience i may add) [curse]
  18. boristhespider2

    Capro Process?

    or in more detail. SOLUTION Following are the different Communication Manager processes and thir functionality: Capro: Capro is the Multivantage call-processing process. Capro is actually made up of many processes, including the user-manager the service dispatcher and the connection manager...
  19. boristhespider2

    Capro Process?

    This process is responsible for call processing.
  20. boristhespider2

    Utility server

    https://support.avaya.com/downloads/download-details.action?contentId=C2012319735548260_9&productId=P0068

Part and Inventory Search

Back
Top