Search results for query: *

Hi All, I really need help. I need to connect an IVM 4port to a 3550. Where can I find installation instructions? Thank you.

Struggling to open the website: https://hipath.tonidoid.com/ Says the device is unavailable?

Hi All, I need assistance on setting up myagents for a client. It needs to start with an auto attendant message and then ring at an ACD group. Client want the myagent software loaded. Licenses are loaded. Thank you.

Hi All, We need help in setting up Auto Attendant on an Unify X8. We have the license loaded but unsure of the setup. Thank you

Is there a manual available to show how to program my agents for a unify X8. I;ve installed the booster card (OCCL) onto the mainboard, but have no idea of how to program it. Any input would help. Thank you

Morning All, Is there a way to eliminate Echo experienced when connect DECT to the BS4 units? I have a problem where the client hears himself when using the handsets.

Morning All, I would like to find out how to connect a camera to my Openstage 60? Has anyone done it before? Example - http://www.youtube.com/watch?v=JsiNv8RDmQY

Anyone know how to setup remote admin via ISDN BRI on this new Unify system?

Afternoon, I have a Siemens Hipath 3800 system with a PRI ISDN, STMI card installed. I have created SIP clients and installed 96 Gigaset DE380IP handsets and 2 x Openstage 60HFA. Initial tests showed that the phones worked 100%, it could dial internal/external. However, once I activated...

on the main phone: *95 31994 31994 22 39 change the ip mode to LIM insert the IP address Subnet Def Gateway restart pabx

Can anyone assist with the pinouts or wiring for tx/rx on the DIUT2 cable please?

Hi, what version software are you running?

Is it possible to remotely program the EVM module?

Thnak you, it works 100%. How do I record the greeting on the AA - "welcome to .... for sales press 1....

Thank you, how do I forward the virual ext to the group?

How do I setup the EVM on the Hipath 1150? I need to set it up for incoming calls to be routed like an auto attendant.

Installed a CMA module and it works 100%, thanks for all the assistance :)

I'm getting the CMA tomorrow. I have setup all the ext's and it shows 12 x mobicode's. After that I do the following step( Dont know if it is correct) *942 19970707 (ext no) I then press register on the Gigaset phone but it states that no base was found. The BS4 the green led is lit and the...

I'm going to order a CMA now and test it, will post my findings again. Thank you.

Yes it is, I'm just concerned regarding the CMS or CMA module, not to sure which one I need to have installed.