Search results for query: *

Yes, We have several users complain of this problem. I have looked on their website (KB, Forums) and cannot find any resolution.

I understand 9.04 has problems. Look for patches from MDaemon, hopefull soon.

In my test, I only set up one external email address. If the message was blocked as SPAM, wouldn't it have also not been forwarded to the internal email address? The forwarding to an internal address is working.

Forwarding enabled but messages will not forward to outside email addresses, only internal addresses. Any configuration parameters I should check?

Look into this company called Zeacom http://www.zeacom.com/ We have used their Desktop solution for our agents (<30) and have been very pleased with Zeacom support.

Thank you TimReg_ The device has been found! Of all things it was new Oki Color printer with an ethernet print server that has not been configured yet. After disconnecting it from the switch, the IPS stopped reporting it.

Thank you Roland. Config is now working. Cannot understand though how firewall tester at www.auditmypc.com is able to report my internal ip address. show xlate results show PAT Global 66.140.43.141 (xxxx) Odd. [ponder]

I have (5) Superstack 3 (4400 SE) switches. I would like to look at all of the ports and determine what IP addresses are assigned to the devices connected to all of my ports. Our IPS reports are showing that there is some device on our network with an IP address 169.254.246.264(source)...

Please see attached config below. Current config allows me to access a website ONLY when I enter the ip address and not a domain name. I looked at the alias command but there is not one in this config as you will see. You will also see a dhcp dns entry for the DNS servers provided by the ISP -...

I was not considering our private network in this PIX configuration because I want this PIX to be dedicated. Maybe something like this model where our lobby/vendors have their own "private" network: | Internet | -------------- | | |...

Have a PIX 501 that I want to config so that vendors who visit our company can access the web without having to plug into our network. I have a free static IP address available on my Cayman ADSL router - Is there a way I can config PIX so vendors or any guest in our lobby can access net the...

Any recommended solution to allow a home computer access to another for a small business? Home computer internet access is dialup with possible plans to install broadband service. Office computer has no internet access yet. Broadband will be ordered as a part of this project. How about a...

What device could I plug into a power receptacle that would have its own power source (battery), be connected to my network and in the event of a power outage (and return of power) send those event messages to my mail server to notify certain MIS personnel who have pagers and mobile telephones...

I many not be answering your question properly but the way I have it set up at the main office on the Concentrator is for remote users to dial up or use shared internet access or whatever means they have at their disposal to get on the net, then they start the Cisco VPN client to connect to our...

I allow remote users to access network using a Cisco Concentrator. One particular remote site with DSL can never remain connected using their Cisco VPN client; 2 different VPN clients 4.02 and 3.6. None of my other remote users (dial up and DSL, etc.) experience disconnections. I have even...