Search results for query: *

I'm trying to set up SIP trunking between a mitel 3300 and a cs1000 rls 7.5. Does anyone have any documentaion on the 7.5 part? So far the Mitel can call the cs1000 but the cs1000 can't call the mitel. Robert

I just put in a new CS1000E with tdm and ip sets. When I page to a valcom unit with a tdm set(3904), acod 7 and then 1 for page zone 1 everything works great. When I try this from the 1140 ip set it does not work, it connects but won't take the zone #. Tgars and Ncos are the same on the TDM...

This is the weird part, when i call from pbx to cisco or cisco to pbx everything works great. when i call from cisco to the pbx and out a cot trunk, the call completes and you can talk but after 2.5 3 minutes the call drops and the dch messages say recovery on timer expiry.

I have an option 51 connected to a cisco call manager via isdn. When i call between the to systems everything works great. when i call from the cisco to a cot trunk line for a local call throught the option 51 the call drops after 2.5 to 3 minutes. The DCH debug shows call is not end to end...

When i swapped out the MC32S I ran the config from the command line when logged into the card. when I reset the card it boots but display shows unreg, the other two show F000. When I login to element manager it only shows the signaling server node not any of the MC32S cards. Do I need to add...

I running CS1000 5.5 with dual cores. Having problem changing out MC32S card in the signaling server cabinet. Presently 3 MC32S card set up a followers. When I input the replacement card it comes up as unregistered. I pu the Elan ip addressing in via the rs232 port on the L adapter on the...