Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. slim187m

    11.1.1 DTMF not working on 9608's

    Also found that VMPro client (11.1.1000.103 / 11.1.1.0.0 build 103) does not work with prior software release 11.1.100.14 / 11.1.0.1.0 with the UCM. Haven't seen anything about this in the docs.. This software is defective
  2. slim187m

    11.1.1 DTMF not working on 9608's

    I experienced the same with IP Phones only SIP/H323 on this release. Digital phones as well as analog worked fine. Ended up downgrading back 1 version. The difference we had were analog lines, which start as Spectrum cable lines. The only workaround I found was to conference the call, then it...
  3. slim187m

    Avaya IP Office 11.1 Feature Pack 1 now available for download through support.avaya.com

    Thanks critchey. -I will continue the thread there
  4. slim187m

    Avaya IP Office 11.1 Feature Pack 1 now available for download through support.avaya.com

    Has anyone had DTMF issues with this new release? I am having a problem where DTMF tones are not being recognized by remote IP + SIP phones over VPN. Have yet to try with an IP/SIP phone at the site where the system is. Admittedly these are analog lines converted from Spectrum cable. However...
  5. slim187m

    UC MODULE FUN R10.1 SP2

    Ha thanks guys, guess I should know better by now. Was just looking for some confirmation that Web Manager still needs work and if anyone else does the same dumb things trying to make the programming by the book. I'd rather get a consensus here rather than waist time reporting something that...
  6. slim187m

    UC MODULE FUN R10.1 SP2

    Not working how it's supposed to is the problem. It's crap like that that steal lots of time away troubleshooting after spending the time and money to sell it
  7. slim187m

    UC MODULE FUN R10.1 SP2

    Anyone run into the situation where IPO Manager shows Voicemail Type as Voicemail Pro on UC Module with the correct IP address, but Web Manager shows Voicemail Lite/Pro also with the correct IP address? However if changed in Web Manager to Voicemail Pro on UC Module, Voicemail Pro stops working...
  8. slim187m

    Avaya Communicator 2.1.4.0 Build 256

    Well got it working. Seems forwarding port 80 worked. However I had that pointing to the IPO before...I can't imagine setting up the SIP Registrar FQDN is what also did the fix though, but what do I know... No longer "Loading contacts." All local Contacts are available now Thanks everyone...
  9. slim187m

    Avaya Communicator 2.1.4.0 Build 256

    Ok, correct me if I'm wrong. Went to Godaddy, setup a subdomain to point to the public IP address of the IPO. - Not sure if this was required, but seemed logical to get remote communication using name for seamless roaming. In Manager, set SIP Domain Name in LAN interface to the domain -...
  10. slim187m

    Avaya Communicator 2.1.4.0 Build 256

    yeah I'm so unfamiliar with the concept of DNS in this setup. I don't know what the purpose of the public and private DNS involved and how they come into play here. I'm thinking if trying to access through the internet, I'll have to get a publicly accessible sub-domain to point to the public IP...
  11. slim187m

    Question on Basic to Essential Edition

    Just configure with a 2 at front of each extension (x210, x211, x212, etc...) and let them know to just get used to it. It'd be better for the AA config depending how many phones they have. Otherwise if they're bent on it, it will work fine
  12. slim187m

    Avaya Communicator 2.1.4.0 Build 256

    Also as a side-note, remember I'm not using one-X Portal. This is just a Telephony-only solution
  13. slim187m

    Avaya Communicator 2.1.4.0 Build 256

    Okay, maybe that's what it is... I only had SIP Domain Name entered, and not SIP Registrar FQDN. Looks like I'll have to study up to see how that works. I'm guessing I'll have to get a sub-domain pointed to the IPO??
  14. slim187m

    Avaya Communicator 2.1.4.0 Build 256

    Tried 'em all, didn't work. Thanks again
  15. slim187m

    Avaya Communicator 2.1.4.0 Build 256

    alright, I'll try all those and narrow it down and will post back. Thanks CASS!
  16. slim187m

    Avaya Communicator 2.1.4.0 Build 256

    Anyone run into an issue where Avaya Communicator - Telephony only (NO one-X Portal) successfully Loads Contacts when locally connected to the network, but does not load them when Remote? Just says Loading contacts... Is this possibly a TCP/UDP port issue? Everything else that's supposed to work...
  17. slim187m

    Backup - where the heck is my cfg?

    I've found all mine in this location. Let me know if you find them there too... C:\Users\<UserName>\AppData\Local\VirtualStore\Program Files (x86)\Avaya\IP Office\Manager
  18. slim187m

    Voicemail Pro question

    ugh, thanks Joe
  19. slim187m

    Voicemail Pro question

    Trying to figure out the best way to make voicemail pro 9.1.5 condition for 1st Saturday of every month. Have a Customer where they are open Monday thru Friday (closed for lunch) but also open only on the 1st Saturday of every month. Is there an easier way to do this without having to use the...
  20. slim187m

    Analog Line 1 Only Programming in Manager

    Is that because of the 8.1(95)? if so, would downgrading to 8.1(85) be the fix?

Part and Inventory Search

Back
Top