Search results for query: *

If you have linux, you can use RANCID to automate backups (and it will store them in subversion or cvs).

I forgot the mention that the other PBX is a shoretel.

Is this even possible? Are 6.5 licenses available anymore?

Can someone post the ftp voicemail backup commands? Should I just use a system-level admin and find the directory myself?

Please ignore my last post. I found the right cable here: http://www.voip-security.net/index.php/articles/mitel/mitel-controllers-menu/93-how-to-make-an-mitel-e2t-cable

Would this be correct? (from an audiocodes mp118 manual) db-9 (female) ps/2 2 <==> 2 3 <==> 6 5 <==> 3 I've uploaded it to dropbox too...

Also does this card really run ssh on port 2007 or telnet? Just trying to soak up everything I can before the class.

I'm looking for the pinouts to create a cable for the e2t card on the lx (as mentioned in this post http://www.tek-tips.com/viewthread.cfm?qid=1676227 by LoopyLou) Or is this a cable they give out in the mitel classes? Irregardless, a pinout or link would be appreciated.

I've read that if it doesn't work change which side is the CO/network and which side is the user.

If you're doing the maintenance you'll like Shoretel better after it's installed.

It turned out some fax machines aren't in the dialplan, and some were.

I understand now. There's a SIPconnect group and others standards groups trying to make a standard but it doesn't work well imho. I hooked up an ip pbx to a certain clec's sip trunks which are certified on that pbx, and they are SIPconnect members. Everything works fine except one little...

What do you mean when you say that there isn't really a SIP standard yet?

I'm a bit of a shoretel newbie, but Under trunks/trunk group there should be a setting for adjusting tx/rx gain.

I have some NBX ATA's where some require dialing 9 and some don't. Is there any way to make it uniform, either always dial 9 or never dial 9? I don't see any setting in the NBX or the ATA to fix this.

pig, admin, and the sa-100 appliance install guide. Look through the install/maintenance guide too, as recommended by atascoman.

Would a power supply from a 3c10201 fit a 3c10202? According to what I've found online it seems the only difference between the two is the 3c10202 has redundant psu's. I can't find any list of parts or a system breakdown or hardware maintenance manual.

We are receiving the following voicemail from our phone system: “A power supply error is being reported by your 3COM NBX telephone system’s call processor. Power supply 1 is not operational or has been disconnected from its power outlet.” The power supply is plugged in, we verified it...

I'm a newbie, but hyperterminal is good for resetting the password. Try running wireshark to find what subnet it thinks it's on. Then assign that subnet and mask to your router to get into the web interface. I would say port scan the network for the open port 80 but if you don't have the...