serial to ps/2 pinout for E2T card in LX?

[nintendo1889]

I'm looking for the pinouts to create a cable for the e2t card on the lx (as mentioned in this post

http://www.tek-tips.com/viewthread.cfm?qid=1676227

by LoopyLou)

Or is this a cable they give out in the mitel classes? Irregardless, a pinout or link would be appreciated.

 

[nintendo1889]

Also does this card really run ssh on port 2007 or telnet?

Just trying to soak up everything I can before the class.

 

[kwbMitel]

faq1329-5869

The socket is under a chrome cap on the underside of the controller nearest the edge.

You can simply insert 26 gauge wires into the pin holes

Make sure to adjust the cable accordingly (instructions are for the cable, not the socket)

**********************************************
What's most important is that you realise ... There is no spoon.

 

[nintendo1889]

Would this be correct? (from an audiocodes mp118 manual)

[tt]
db-9 (female) ps/2
2 <==> 2
3 <==> 6
5 <==> 3


[/tt]

I've uploaded it to dropbox too

https://www.dropbox.com/s/01xglhxbe...-9 Converter (for the PS-2 E2T card port).pdf

 

[nintendo1889]

Please ignore my last post. I found the right cable here:

http://www.voip-security.net/index....ollers-menu/93-how-to-make-an-mitel-e2t-cable