Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Punk6296

    slow WAN download speeds over UC540

    Hello Ive noticed over the switch ports on my uc540 my download is slower than my wan connection. ive isolated the UC540 and receive directly from my cable modem 100/12. via uc540 i seem to only be receiving 30/12. This was setup via CCA with no additional routing configuration other than some...
  2. Punk6296

    UC520 MOH help needed

    Hello all total Cisco n00b here. pretty much have it completely set up to my liking in my home but one thing i cannot figure out is the MOH 3.5MM audio source. At one point it was working great. fail over to MOH file was working as well. for some reason with no change i cannot get audio to...
  3. Punk6296

    UC520-8U-2BRI-K9 Questions

    Hello all This system has fallin into my lap with two 7960G phones for free! Never have played with a cisco system before, Always been a nortel norstar system guy. so i have a few questions on how to set this up. Not a pro here but i can follow directions if im pointed in the right direction...
  4. Punk6296

    New BCM system suggestions.

    Thank you all for the time you took to shoot some ideas my way, As far as what system i will be going after despite all your great information on the Ucx equipment i will be scouring fleabay and other places for a BCM50.
  5. Punk6296

    New BCM system suggestions.

    I will check out your website for sure exsmogger! i can use all the tech info i can get!
  6. Punk6296

    New BCM system suggestions.

    Thank you all for taking the time to reply to my thread i appreciate it. I have looked into the UCx systems, One of my bloggers i follow is a UCx guy but i would be purchasing used on Ebay. i have no problem with going that route and would like to just go with the BCM because part of my...
  7. Punk6296

    New BCM system suggestions.

    Hello all Old Norstar guy here. currently in my home have installed a MICS & Call Pilot 100 2 port system. Soon my wife & i will be moving into a tiny home. we will still be working from home but cannot take the MICS with us.. too big for the tiny home and thinking its time for something more...
  8. Punk6296

    Off site remote norstar questions.

    Thank you all for taking the time to reply! I dont think i would purchase the MCK gateways new but i will definitely be purchase used on fleabay with a warranty. I did the see them before but wanted to check with the helpful experts first since you all have never steered me in the wrong...
  9. Punk6296

    Off site remote norstar questions.

    Hello all. In my home i have a MICS 7.1 XC, In a relatives house i would like to install maybe 1 or two telephone sets remotely. is there some type of equipment that will run over the internet that the sets can plug into at the remote location? sorry for the n00bness.
  10. Punk6296

    Numbers on button indiactor LCD strips?

    Ill explain as best as i can. Took apart a m7310 to paint the shell and when i took the board out and set it down on the work bench im not sure what possessed me other than my inner child but i pushed on the LCD indicator strip and the arrows lit up... but numbers did as well. In the middle of...
  11. Punk6296

    F986 Trans to MBOX not working on one extension.

    Yep, Adding the intercom button worked like a charm. i could of bet that i hadnt changed any programming but i guess i did! thanks for the help!
  12. Punk6296

    RAD with Ooma or Magic Jack

    I used to use Vonage at my home for faxing and RAD & it worked wonderful. Minus the contract they make you sign & the continued rising price. I use magic jack now and it works just great but i use the old magic jack. the connection is only as good as the computer your running it on with the old...
  13. Punk6296

    F986 Trans to MBOX not working on one extension.

    That makes total sense, I only have the set under 1 i/c button. I will try that later today when i get home and let you know! thanks for the reply!
  14. Punk6296

    F986 Trans to MBOX not working on one extension.

    Hello all. Have a MICS 7.1XC system with CP version 30.00.72.22. I have one extension that refuses to do Feature 986 Said extension used to preform the feature & nothing has changed since the last known time it was working. Set has no restrictions (ive never set any up its my home system)...
  15. Punk6296

    Creating the option for callers to dial extension or wait to be transferred? Possible?

    Well ive gone back to building the CCR tree thru Feature 983, Ive successfully built 3 paths. but still cant find a no response or rotary phone option?
  16. Punk6296

    Creating the option for callers to dial extension or wait to be transferred? Possible?

    I dont see any of those options, Im fairly new at this.. Im trying to create this under the CCR Tree administration.
  17. Punk6296

    Creating the option for callers to dial extension or wait to be transferred? Possible?

    Ive been trying with the call pilot web interface to build a menu that goes something like this.. " If you know your parties extension please dial it now. Otherwise please hold and your call will be transferred" I cant figure this out what am i doing wrong?
  18. Punk6296

    Line card locking up?

    Thank you for the reply, yes all lines are supervised. The problem hasn't ever happened again so im not sure. All i did was restart and reseat all the cards and it has been plugging away without locking up since?
  19. Punk6296

    Trouble tracking down desktop messaging program.

    Ive been desperate to track down a copy or a vendor to purchase from. My system is in my home im not a business so im having a hard to finding anyone who will help me. Ayaya keeps telling me i need a customer ID or a vendor ID which i dont have i purchased the equipment from an Online seller...
  20. Punk6296

    Cics with static lines

    I Have encountered the same issue on the system in my home, Mics 7.1XC CI cards with TWC voice Turned out to be a known issue with the Arris Touchstone TM508 modem i had. Im on my second one because of static & the modem refusing to make dial tone or constantly dropping and syncing Also ive...

Part and Inventory Search

Back
Top