Hello all,
Is there any way to call an executable from the E7 Autosequencer? I've seen RES3700 doco that shows a tab for it in that product, but I don't see anywhere in the E7 software?
Additionally, is there anyway to call an executable from a touchscreen key? Again, I have not seen any...
Hi Pat,
Hope you are still reading this thread. Thanks for the CAL info. I've been playing around and got most everything working with my E7 system.
I do have a couple of questions.
First, is there a recommended way to "wipe" a terminal and reinstall via CAL? I want to be able to play with...
Thanks for the reply, but as my initial post says, I am running a server with the E7 and it says I am trying to push a copule of files out to the WS4's, so I am still looking for any direction anyone can give me on how to use the Client Application Loader.
ie. Do I need to run an executable on...
Can anyone explain how to use the Micros CAL. I have a server running the CALSRV.exe and I have tried to run McrsCal.exe on the WS4, but it doesn't seem to do any update.
Can you tell me which folder on the server is used to update the workstation.
I am trying to use CAL to push a couple of...
Hello,
I am looking for a copy of the CAL.PDF file.
Client Application Loader (CAL) File
Specification (MD0003.061), available as CAL.pdf in the \Support\sdk
folder on Disk 2 of the RES 3.2 CDs.
If anyone could post it for me, I would appreciate it.
Thanks.
Hello,
I recently purchased a used Micros E7 system from a guy who closed his restaurant a couple of years ago. Not planning on using it in a restaurant but to do some testing with for our online ordering solution. It's got an office PC, and 2 WS4 terminals, all with license keys, and is...
Hi Simon,
I am trying this in a test environment and still cannot get it to work.
I have enabled IPRouting.
I have it setup exactly as you describe. The 10.10.0.x terminal has a gateway of 10.10.0.100.
The 10.10.0.100 NIC has no gatway.
The 192.168.1.4 (actually 192.168.0.116) is setup with...
Thank you Simon.
I have tried to configure 192.168.1.4 as the gateway on the 10.10.0.100 NIC and I configured both 10.10.0.100 and 192.168.1.4 as gateways on a terminal, but did not have any luck. I also enabled IP routing on the server but that didn't work either.
I can make changes to...
Hello,
I am trying to find the best way to handle the situation below.
I have a network with 3 terminals, static IP addresses of 10.10.0.x subnet of 255.0.0.0. They are connected to a switch. The switch is connected to a server with 2 NIC cards, one is 10.10.0.100 static and the other is...
Hi,
Looking for advice on the best way to setup an Aloha Terminal to be able to
access a web service on the internet.
I've got a takeout application that runs on a FOH terminal, and it needs to
check a web service for new orders via port 80. I've installed on other
Aloha installations, but...
Sorry to hijack this thread. There isn't a way to IM on this site, so I appologize.
pmegan, I've just posted a Micros question. I've read several of your posts, and you seem very knowledgable.
Hoping you could answer.
http://www.tek-tips.com/viewthread.cfm?qid=1563383&page=1
Thanks!
Does anyone know if there is a way to print to a Micros printer from another application? I am thinking 3700 terminals specifically. I assume Micros "locks" the printers, just like Aloha and Positouch.
I have an application that supports both Windows Printers and OPOS drivers.
If the Micros...
Does anyone know if there is a way to print to a Positouch printer from another application?
Aloha has a utility to send a text file to a printer.
Does Positouch have anything like that? Or is it possible to upload an XML file to be sent to a prep/check printer?
I've tried serial and...
Well, thanks for the replies.
I know how to setup the hardware, I am trying to setup the Positouch SW. I am not sure if it supports USB printers or OPOS drivers. I can't see it in the setup at all.
Thanks, but how do you name the OPOS printer within the Positouch BOH? Or do you set it up in an INI file.
I can setup the OPOS drivers for the printer, but don't know where to tell Positouch to use the OPOS printer?
Thanks in advance.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.