Search results for query: *

TELECOM: SMDI100 LOG EVERY MINUTE The solution to the problem is to change the DN in the heartbeat message sent by the VMS to one with an invalid length such as (XXX)999999. This will prevent the log generation. The above solution is for a SMDI link that has NONMS in the option Does anyone...

Does anybody have older REDCOM experience that connected a PRI between these to switches? Since the Redcom does not do NI2 I am having to use ESS5 or D100 on the CS1000. Had a partial PRI come up with 4 channels in FE Make busy on the CS1K the rest were idle I was able to call the REDCOM but the...

Caller ID works fine on all other calls except call pickup on an 8945. When picking up a call on an 8945 phone, using the BLF key, you get "unknown" for the calling party. When picking up a call on an 8961 phone using the BLF key, you get the calling parties I.D. There is nothing wrong with...

Release 5.0 DSN I know there was a patch produced for 3.0 DSN They have all the latest and Greatest. the problem has since stopped happening. I ran at the time four MIDN routines after that with no issue so I am now watching everyday. sorry it took so long to get back to you I have been out of...

% INI000 00000041 02 55 51 00000000 00000000 00000000 00000000 0 ? 00000081 % DSET000 25/10/12 02:56:03 1509204 % OPRDATA: DOWN LOAD 0 0 0 0 0 0 0 0 % % INI002 25/10/12 02:56:04 1509205 % OPRDATA: 0000008B 0000008C 0000008D % % INI007 25/10/12 02:56:04 1509206 % OPRDATA: 0000007E...

Thanks, guess what Avaya themselves just agreed they dont have this on there website and have sent me the image. I really appreciate you thanks again.

Where can I get a copy of Succession 3.0 Software I cannot find what I need on the Avaya website. Version 2921 Issue 00 + Deplist x210300_cpt Thanks!

I am at a site of an OPT 81C and need to know what the differnce is between the NT4N41 AA and AB Cores there is no labeling on Core 0 or Core 1 This is running Pentium II Cores DC System. Thank you!

One of our people told me that his Call Pilot Reporter, when he tries to run a report from 01/02/2011 through today only gets a report on three days in the month of July 7th,19th, and 30th. Personally I have never worked with Reporter before so at best I am ignorannt of it. any help would be...

Found that cabling that was done before I got on site was totally wrong. I also found a NORTEL 512 CF2 that I was able to load the switch with 5.0 software. the San Disk cf2 I had would not load the switch. all is running error free.

RMD will not load how do This is the Nortel Bullitin 2009009821, Rev 2 How do I do this:For NT4N39 CPPIV cards, booting from the faceplate RMD - 512 Meg compact flash requires a change in the BIOS settings from auto-detect to a manual user setting. Reissue Reason: The original bulletin was...

Thanks Johnpoole will try

Just moved a switch from one location to another as a 61C It was moved up to an 81C 4.5 DSN software.Network groups were added. now when I got on location and turned the switch on It is in constant sys loads on both cores never gets to a logon. I had to download 5.0 dsn software and made a...

This baystack 5520 is Hardened is their a way to reset the configuration to the default without the Password. The person that hardened this unit cannot find the Password. Been trying to find info, but have not seen any yet. Any help wouldbe much appreciated! Thank you.

Thanks I believe your right, I found there is not going to be anymore updates or patches to these phones.(I2004)

Does anyone know if a working i2004 voip set phase 1 will be compatible with release 6.0? This is a 61C that has a itg card now which is being replaced with a CPPM sig server. Thanks!

I had a similar problem at two different sites. The problem was non approved grounding.

The Carrier can actually turn off the did # At least I have had it done before.It still belongs to you but they get a carrier intercept. In load 49 you can take the digits and convert them into another extension or the operator.I believe if you assign it to an invalid extension it should go busy.

Sorry losing my mind today.

I have not done that in an Acd Queue, but on my voip 1120 e I can nul key 19 to get rid of the cfw key. key 19 nul enter