Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. mobiledynamics

    Tempo Sidekick

    Isolated it out and I think we found the offendee It's been a very long time since Ive used the Tempo not have I ever looked at the circuit with it. If memory recalls, 30 and below on the stress. I've got a few in the 50's and that's with nothing on it. Normal ? Not 100% how calibrated or out...
  2. mobiledynamics

    Tempo Sidekick

    Thx. So far - not observable on day of decent rain observable 36 hrs later. Both dry those days When dialing out, sometime I hear static Sometimes it's garbled on the caller Sometimes when dialing out, no dialtone for about 30-45 seconds and then I get dialtone Something observed recently...
  3. mobiledynamics

    Tempo Sidekick

    OT but I'm trying to decipher a copper line that is not hard short but I suspect it's getting wet It's been a very loooooong time using my Tempo Sidekick. Stress is high. Meter hovers around 50-55 If memory recalls, dump it on Leakage on 1K, rev it and the meter should blip and drop back to 0...
  4. mobiledynamics

    Going HOSTED

    off topic, as my primary camp for voice stuff is here - since we are on a IPO Thinking about going hosted. Looking at RingCentral, Nextivia, um...errr...even looking at shoretel/aka, mitel these days. We've been on-premise for so long, and even today, after running the #'s, the cost per...
  5. mobiledynamics

    VM Pro won't send voicemail-email external - Exchange

    IPO VM Pro. Send voicemail to email fine to email addresses within *internal* to exchange. However, if I set a users email to johndoe@gmail.com, voicemail to email does not seem to either be sending it, or exchange is not ? Any advice on where to start checking
  6. mobiledynamics

    Bad/Failing Port on IPO ?

    IPO500V2 with 2 of the older white expansion units. We have all 44XX digital phones. Phones/handsets on this particular phone port have been changed out 3X. The symptoms are inbound audio on handset not working Swap phones or tinker with swapping handsets seems to have resolve the issue...
  7. mobiledynamics

    Failing Port on IPO

    IPO500V2 with 2 of the older white expansion units. We have all 44XX digital phones. Phones/handsets on this particular phone port have been changed out 3X. The symptoms are inbound audio on handset not working Swap phones or tinker with swapping handsets seems to have resolve the issue...
  8. mobiledynamics

    Digital Phone works off Port - Won't work off (workstation port)

    IPO500 with the older white digital station modules I was doing some wire maintainence on the rack. Prior to unplugging, phone was solid... Plugged cable back into the IPO module. No connection. Fast forward. Ended up checking the run with the DTX back to desk port. Checks out. Take the...
  9. mobiledynamics

    Setting a Forward Key

    The programming is somewhat *different*. Currently, I have 6 DID. Each DID rings to a hunt group. On the phones itself, there is a call appearance for each hunt group. It's setup so that any of 8 phones can pick up each DID . I currently have a FWD button - but the call forward button only...
  10. mobiledynamics

    PRI Circuits and deliverence

    More details here. Lec was on premise after reporting T down. I assume wet pairs...as the PRI was down but overnight it resolved itself. When they were here in the morning, all was well. Lec was on premise to diagnose the *down PRI*. That was what their ticket was for. However, that morning...
  11. mobiledynamics

    PRI Circuits and deliverence

    Can anyone shed some light on this.... When you order a PRI from not the LEC direct, is the copper delivered always a regular T1 and from the handoff from the CO, the carrier is responsible for the PRI from their switch back to the handoff. OR, will a PRI T1 be delivered all the way to the...
  12. mobiledynamics

    Crossed Lines

    We've only had the system for about 6 years... Prior to that , we had a Partner System that had grey hairs but ran without any hiccups. I'm inclined to say it's time to upgrade the chassis, but what would be causing this.....just short of old cranky system ;-)
  13. mobiledynamics

    Crossed Lines

    We have a IP 403 that has started crossing lines. For example, if I have 2 separate external parties on hold, and then I transfer a external party to someone internal.....both external parties get's bridged when doing the transfer to a internal extension. This has been happening enough that fd...
  14. mobiledynamics

    How protected are your Aloha boxes

    Interesting.... Aside from Aloha having remote to manage/troubleshoot, our BOH has NO internet connectivity at all locations... How are you guys using Ibackup ---- or any means of external internet connectivity to run backups offsite ?
  15. mobiledynamics

    How protected are your Aloha boxes

    I've just on board and am looking at 3 of our establishments. One Aloha system setup last year and another a couple months ago. One would think there would be bare minimum Raid 1 on it....but sofar, I'm seeing nary - nil backups on the server.
  16. mobiledynamics

    VM Pro/Manager 3.2 - Windows X64 2008 compatability

    Dying VM Pro Server. Installed 3.2.29 VM Pro and 3.2.69 Admin on a W2K8 x64 server. Manager seems to work fine. I was able to log into IPO, change VM PRO IP address to *new W2K8* server. VM Pro - restored reg. backup settings, imported backup call flows and tested it. All seems well. The...
  17. mobiledynamics

    Help with T1 Setup - Newbie

    I believe the OP has a full T1 in which there should be both a PRI and wan output. PRI for his IPO and let's say channels 12-20 are used for data...
  18. mobiledynamics

    SIP Trunk Experiances - IPO

    I did not see a master thread on this, and it seems there are alot of over the pond folks over here, can ya'll post your experiance with SIP trunking providers in the US that you have setup to work with IPO successfullt ? In my research, the only ones I'm coming across would be the big players...
  19. mobiledynamics

    4XX to 500 module compatability

    On the VCM module in particular, is there a difference in voice-sound quality on the newer V2 400 modules (25ms) as opposed to the newer VCM modules for the 500 ?
  20. mobiledynamics

    Help with T1 Setup - Newbie

    I think what cargoski means, is remove the router out of the equation - and go from smartjack to IPO direct.

Part and Inventory Search

Back
Top