Search results for query: *

Hi All ! Got two ADSL links connecting Head Office with Branch, But IPS assigned by ISP are Dynamic. What is the procedure to link both sites, so that pcs at the sites can connect to Server in Head office. I don't need to register any Dns as my purpose is to link both sites.I plan to create...

Belushi! Burt missed my point. What u mean "assuming you do the CCNA is somewhat short timeframe from passing your CCNP tests" My plan is to do the remaining two CCNP papers, first, then CCNA. Any contact email address from Cisco where i can confirm my situation? thanx

My CCNA expired in 2005. But for an employment reason, I have passed CCNP Composite papers two months before. I want to complete the remaining two papers as i just finished CCNP Course in an institute. Then want to finish CCNA. That means i m doing all my CCNP papers without a prerequisite of...

Thanx Techies ! Which tools perfectly suits to monitor the traffic during abnormal condition ( for example Virus Infection or Intrution kind of activity) than to monitor just interface or link failure.And it should create Alert as well. Vanna

I f any body Has implemented any VOIP solution, I need to have the complete Documentation of the Solution. I like to know the Scenarios and what factors need to be considered such as QOS,traffic engineering,Bandwidth selection process,Call Manager selection etc. Any body can help to get...

What kind of Software and tools the industry uses to monitor network Traffic? There are Open Source Software tools too in the Industry.Any body using those? Can we monitor abnormal traffic generated in the network in order to isolate the problems, for ex. traffic generated because of a virus...

I need the following information for a research Purpose: 1. Satistics of IT companies. (INcreases in Customer base for IT) 2. INcrease in Sales of computers compared with 2, 3 decades before. 3. Cost allocation for IT of big companies. or business entities. 4. generic application usage of...

We have adsl Router having lan SIde IP as 172.16.1.1 which is running NAT. I want to apply Access list to the Switch where all the clients connected.I want to apply ACL Outward direction of the Switch Interface which connects to the ADSL router's LAN interface which acts as INtenet...

What SNMP Software R U using? People normally use SNMP agents to be installed in the servers which comes with the Snmp .They Create standard templates which can be linked to Several Servers.

procedure follows: 1.Enable SNMP in the Device ( All versions better) 2.Get the MIB file for the device frm Vendor' 3.Use a MIB Browser to load the MIB file. Then walk thro' to get the OID of the needed parametre. 4.Use the OID no.in your SNMP Management software. If any help, reach me on...

Hi All ! i passed CCNA expired in 2005.I have been working on Cisco routers n Switches. But i was able to register for CCNP Composite exam 642-892 and passed in march this year. If i plan to pass other two papers to get CCNP. TO get CCNP Certification, Do i need to pass CCNA Again? Vanna

This avoids the need of specifying the rules for the Outward direction!Is it correct!i already done the rules and it works fine. Thanx U for all the help!Great work!

Bill! U r great! I had doubt in mind whether i need to add "established" in ACL.If apply the following "access-list 101 permit tcp 10.125.0.0 0.0.15.255 any eq telnet established", will it allow the return packets when i telnet from 10.125.0.0 network? Whether i have to add "Established" to...

I want to allow SMTP,FTP,TELNET,143.icmp only from both netwrok. And i want reply from SMTP server. if i give command "telnet 10.135.1.10 25 'to check the server otherside of the network is working. chek the config is correct!i m able to ping both sides.but when i do "telnet 10.135.1.10 25...

Hi Techies ! I appled ACL as mentioned early. I need to check what ports are passed thro'the router!Any tools i can run n check the open ports? I run "telnet 10.125.0.10 25" to my SMTP server from 10.135.1.10, but cannot get any reply! How to solve the issue.Any other ports to be opened...

I given below the configuration.! This router has in-built Switch too.Document says we can use Ethernet2 for DMZ as well.And i plan to apply ACL between two networks allowing certain ports such as 80,21,25,icmp,143.Plz .check the Access lists are correct.i m goin to apply ACL 101 to E0 inward...

Need to configure Cisco 831 Router to do Ethernet Routing !10.125.0.0, 255.255.240.0 is one Range. Gateway is 10.125.0.3/ otjher range is 10.135.1.0,255.255.255.0 , Gateway 10.135.1.1. I eanbled ip routing.Is that enough for both network to be communicated. provided i have to mention the...

Fundamentally,Y the manageable switches are expensive becoz it has the technology to manage the network traffic to suit the business.If U want to add switches each time U have new requirements,that's not the way IT should be managed. So, my advice is use the power of VLAN,Private Vlans and...

I responded ur previous thread too.If your switches support VLAN, go fot it. Or You have to do firewall rules.You can allow the INterenet gateway and ports 53,80,67,68 allowed.

Assuming you have common internet gateway for both ur trusted network and public internet,Best option is to connect the public WIFI in separate VLAN.If ur Switch support Vlan, u can configure thro'it.or if ur accesspoint support Vlan, U can do it thro' it. If nothing possible,u need to enable...