I have a system where when a room recieves a wake up call it is not recognized as beeing answered in the room unless they listen to the whole wake up message. Is there a timer that I can adjust so the wake up shoes to be answered when the phone actually goes of hook? The system is a option 11...
I have looked on Nortel's website but I can not find the security updates for the contact server. Does anyone have a list of the windows updates that are approved by Nortel/
Have a 2250 console we programmed buttons as adl buttons and also as auto line buttons in load 12 and we get no error codes. Then wwhen we print the console out the buttons just say 5 adl 12 or 5 auto 12 the numer we entered when proggramming it is gone. Has any one else seen this before.
Does anybody know if there is a version of the desktop client that will support windows 7 and outlook 2010. the latest version I see is Desktop Messaging Client version 05.00.41.110 but its status is VO and I cannot look at the details for it.
Every 2 weeks on Monday morning the time is off by 12 hours.
I have disabled NTP and checked to make sure the Sig server is in the correct time zone. System has all current patches.Does anybody have any suggestions on how to fix this problem.
We had the same problem with a switch just upgrade to 6.0 with new proccesors. The system would not read any external flash card. We powered done the system and it would not come back up both proccesors where bad and had nolt been installed 2 months.
I believe once the system joins the security domain admin1 and admin2 will only work if the UCM is down. You have to log into UCM and create new users and give them acces to what applications they need.
When TM access the pbx to get the traffic reports all it does is to gie out these errors.
OVL001 24/05/10 15:15:48 1149234
OVL001 24/05/10 15:15:48 1149235
OVL013 24/05/10 15:15:48 1149236
OVL401 24/05/10 15:15:48 1149237
OVL429 24/05/10 15:15:48 1149238
any ideas
This is the info from the site that works, not on site to test.If you place a call from the same phone that the MOH on SIP trunks did not work via the PRI the music on hold works wich is the same music source.
VERSION 2921
RELEASE 4
ISSUE 50 W +
IDLE_SET_DISPLAY NORTEL
DES MUSIC
TN 012...
We have two systems connected with sip trunks. if you call between location from a to b and a puts you on hold you do not hear MOH. If b puts you on hold you hear MOH.Here is the info of the site that does not work. I see no differance between the two locations but as always might have...
Apparantly we had two bad brand new CPUs. We power cycle the switch and afterwards neither CPU would power up. Advanced replaced CPUs and the flash cards we had installed in the old CPUs would work.
.stat
Just upgraded system and cmdu switch cores and swapped compact flash cards and get this message has anyone else had this problem or know of a fix
FMD
VENDOR: STI Flash 8.0.0
/p CAPACITY 318767104 Bytes
FREE SPACE 219156480 Bytes
/d CAPACITY 318767104 Bytes
FREE SPACE 317321216...
In ld 21 do a ltm 2 for route 2 it will show you all the members of the route which should be just one member. Then id ld 11 stat that tn. If it is busy you can disu the tn and then enlu the tn. then stat the tn again and see if its idle.
You should be able to change the password expire time in the class of sevice for the mailbox that the fax are in. The default value is 90 days you can set it to never expire by changing the value to 0.
I have been told that if you change a CLID table with it still assigned to phones that it will INI the switch. Does anybody no if this is true from past expeirances?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.