Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. northportphoneguy

    how to view offline backup on Mitel 3300 MXe

    Update. I correct myself. It is not fo form /port I do remember doing what you want using ALL. However, I found this: http://edocs.mitel.com/TechDocs/Platforms/3300ICP/MCD-5.0/sysadmin/sysadminhelpmain.htm It seems that up to 4.0 the ALL form is there and has been changed to Maintenance...
  2. northportphoneguy

    how to view offline backup on Mitel 3300 MXe

    Hi sarond, I believe it is fo form /all /port lpr3 Be prepared for a loooooong run. Like hours. You will get a lot of empty forms.
  3. northportphoneguy

    how to view offline backup on Mitel 3300 MXe

    Followup: I tried the port 1754 route but I did not get any scrolling forms. I thing port 1754 is lpr1. I did find this on the net and describes what I do with the only difference being I use PuTTy...
  4. northportphoneguy

    how to view offline backup on Mitel 3300 MXe

    sarond, I do a variation on this. I use PuTTy so I can connect the ip address and use Port 23. This gets me to the old VT100 terminal style interface from the SX2000 days. From there you can get to the command screen and to the formprint that you want to do. For example if I want all the...
  5. northportphoneguy

    credit card machine via IP networking

    As an aside, I have found a T.38 fax from our facility to a fax machine that has line monitoring will not work. I cannot fax to our local auto repair vendor because he has his fax machine monitor his voice line. I think what happens is a voice answers and then his fax hears the ‘tone’ and...
  6. northportphoneguy

    Time Sync off by a minute

    I have both a DNIC 4025 and an IP 5224 on my desk and noticed that the IP phone was always behind the 4025 by some amount. Say it would always be 30sec slower than the DNIC phone. And the amount it was slow would change if the 3300 was rebooted. One day the service guy is here on a Mitel...
  7. northportphoneguy

    credit card machine via IP networking

    My experience has been that modems and CC readers will not work or, will work for awhile then fail over IP trunks. My failures include the mail machine in S&R that dials out to reload money, modems used by the local electric company for remote meter readings and CC readers. For the CC...
  8. northportphoneguy

    Mitel 3300 System Speed Call Script - OPS manager

    fi3ndlich, I'm a skinny guy, but I have FAT fingers. jonathanwilliams306 williams with an s. Sorry 'bout that.
  9. northportphoneguy

    Mitel 3300 System Speed Call Script - OPS manager

    fi3ndlich, Send an email to my nomdeplume at hotmail.com jonathanwilliam306 I'll contact you direct. Cheers
  10. northportphoneguy

    Mitel 3300 System Speed Call Script - OPS manager

    I do something like that using a modem, dos commands in a batch file and the Windows Schedule. There are a number of extensions that get forwarded to speed call numbers at various times of the day. I wrote batch files using the dos commands like: mode com1: baud=9600 parity=e data=8 stop=1...
  11. northportphoneguy

    Find a VMail file and change it to a avi filfe

    foc, Using ViewMail, you can access the users mailbox using their 'id' and 'security code' and from there you can SAVE a message as a wav file. However if it has been deleted from the system and does not show in ViewMail it cannot be retrieved and my origial reply is true.
  12. northportphoneguy

    Find a VMail file and change it to a avi filfe

    fok, LL is correct. Your Active Voice is just an addon to any PBX so therefore your question makes no sense in a Mitel forum. However, I have the Active Voice Repartee here at our Facility and the answer to your question is simple: You can't.
  13. northportphoneguy

    T.38 FoIP issues

    Hi, I had similar problems as you and in the fax form I saw the choice of NSF on/off. Wondering what NSF was I googled it and found an article titled "What is NSF and why should I care?" Google that phrase and you will get the article. It's very interesting. Bottom line is if two fax machines...
  14. northportphoneguy

    Possible MCD bug

    Hi, I edited my batch down to it's simplest, but you could add rem(remark) cls(clearscreen) echo on, echo off and the @ sign to dress it up. I cycle 10 call forwards in a single batch. I also have a batch which then cancels cfwd with the appropriate feature access code. Batch files are then...
  15. northportphoneguy

    Possible MCD bug

    Hi, I had a similar situation here. With multiple departmens and all of them wanting different routing at different times, even the OPSMGR switching in and out of Day Service was not flexible enough. So I went back to my DOS days and edited a batch file which dials out the various CFWD and...
  16. northportphoneguy

    Fax log file

    Hi, MXe with 9.0 I issued the command 'fax log enable' to track down some problems. What is the name of the log file? I could then do a logsys read <file> like I do for smdr and maint. Thanks
  17. northportphoneguy

    IP trunking fax issues

    Hi, Yes I do. The problem was a mistake in the way the vendor thought the licenses and reboot worked. They assumed that Fax Profile #1 would be configured for the T.38. All my switches are Zone 1 with a Profile 1 so a reboot was all that was needed. Not so. In fact Fax Profile 1 is...
  18. northportphoneguy

    IP trunking fax issues

    Greetings, As the subject implies. I have 2 MXes with 9.0 with ip trunking bewteen them. To clear up some faxing problems, my vendor installed T.38 licenses. They told me that once the ICPs were rebooted, the T.38 licenses would be automatic. However I still have problems. In looking at the...
  19. northportphoneguy

    How does T.38 do it's magic?

    IrwinMFletcher, Thank you very much for taking the time to answer. I just wanted to understand the process and you have helped. Thanks again.
  20. northportphoneguy

    How does T.38 do it's magic?

    I have a general T.38 question. How does it work? Maybe that was too general. But seriously… Let’s assume 2 MXes’ with 9.0 software and a four pack of T.38 licenses in each. One of the MXes’ has a PRI to the outside world and the 2 MXes’ are linked with IP trunking on their own VLAN. Both...

Part and Inventory Search

Back
Top