Search results for query: *

I had a Nortel guy come out and got into PDT to clear.. Still working..

KCFLHRC, what I am thinking about is 143 to save good data, then if I need to use it for backup. If I can? Thanks

Well, 2nd copy of storage? What is that will I pick the medium? Thanks

Got a EDD016, is it ok to go ahead and do 143 backup? Or will bad data be there? Not sure were data is written to. Thanks

so if i have CLS CLBA, what would a 911 call send?

brain dead after reading clid configuration what would the following tables output?? ENTRY 0 HNTN 618 ESA_HLCL 618 ESA_INHN NO ESA_APDN YES HLCL 463 DIDN YES HLOC ENTRY 31 HNTN 618 ESA_HLCL 618 ESA_INHN NO ESA_APDN YES HLOC 463XXXX DIDN NO HLOC

Is it possible to tell the card which connection to use? I have 2 LAN connections one IP and one DHCP but occasionally they get messed up, and I loose the DHCP. Thanks

CLS did the trick, thanks guys

How do you delete the hot d xxxx on a 500 set? Thanks

Thanks guys will give DIDT a go...

Is there a setting that will allow a analog port to provide a longer dial tone in between dialing. What I have is a data labs voice mail (4 port) that takes to long to pulse out once dial tone is received. I tried changing TIM in LD15 LDTT but it seems like it still times out in about 6-8 sec...

try Screenhunter.. http://www.wisdom-soft.com/

It was in free run, how it got there I don't know... dis cc 0 enl cc 0 stopped the error's THANKS GUYS

This is what I am getting, been up about a hour. CH 05 - IDLE DID VOD * CH 06 - IDLE DID VOD * CH 07 - IDLE DID VOD * CH 08 - IDLE DID VOD * CH 09 - IDLE DID VOD * CH 10 - IDLE DID VOD * CH 11 - IDLE DID VOD * CH 12 - IDLE DID VOD...

Back up used LD 96 dic dch xx LD 60 disl 1 then ENLL 1 all came up, HICAP (AT&T) tells me copper problem Thanks Gib,

Gib, were do I find disl ?

Just had a PRI go red (first time ever) what are the steps to clear, the T-1 card from telco is all green. Thanks

I put my dsl modem in bridge mode, and set up PPOE in the router with my user name and password.

I think you nailed it G, I direct access the pri, and it will go with NPA inserted, I will rebuild in the morning to see what happens. Thanks so much...

Thanks, here it is.. RLI 24 ENTR 0 LTER NO ROUT 3 TOD 0 ON 1 ON 2 ON 3 ON 4 ON 5 ON 6 ON 7 ON CNV NO EXP NO FRL 0 DMI 0 FCI 0 FSNI 0 SBOC NRR CBQ NO ISET 1 NALT 5 MFRL 0 It looks ok to me..