Hi All,
I have a Client with multiple locations that networking a NS1000 with UM. The UM is consistently full (because previous dealer did not add adequate memory). When we performed a Memory Card Usage Report it shows 31,000 New messages, 2400 Copy Messages, 23,700 Deleted Messages and 7674...
Hey Ozzie,
I was able to get it working... it wasn't dialing patterns.... it was program 15-16 had reference to some index's for these SIP Ext. Once I removed them now I am able to out bound call.... not sure why it works... thanks for your help!
Hey OzzieGeorge,
I am revisiting this issue again, I have still not found a solution...now that a have a little time to work on it.
As review, I can call internally (4 digit extensions) and I can receive calls from internally and externally to this SIP Station. I also have Analog, Digital and IP...
I have setup trunk access code. I thought I setup all the phones with same trunk access.
Yes I will have to setup * and # for feature codes... I was going to work on that next.
Hi Ozzie,
I thought I had it correct.... this is what I have
using internal 4 digital dialing and 9+ for outside trunks
([1-2,4-8]xxxS0|[3]xxx|911S0|9[469]11|0|9[2-9]xxxxxxxxxS0|91xxx[2-9]xxxxxxxxxxS0|xxxxxxxxxxxx.)
Hey everyone,
I am looking for help... I have a SV9100 with MLT,SLT,IP and analog/SIP Extensions with SIP Trunks. I am using a SPA122 to provide service for the analog/SIP extensions. They can receive calls, place internal calls but cannot call outside PBX. After dialing 10 digits, I get short...
Hey Guys,
I have just taken over a customers 2 TZ190. They have recently moved carriers both with Static WAN IP's. I was able to re-establish the VPN connection and I am able to ping each other router within the VPN (Site A 192.168.189.254/24, Site B 192.168.188.1/24) but whats really weird is...
:) You and I think the same...I did that very senario and flashing went away when I programmed a different TN, and it came back when I put the original TN back into key 18.
Help Please, I have a Option 11 Rel 25 with a 2616 that has a BFS key that is always flashing for an analog local, why? I have tried reprogramming the key, no change. thanks for your help!
I am a newbie when it comes to NBX100. I have a customer who is furious that when his system randomly reboots that the system takes 1 hour or more for it to come back up. What is the normal time for a NBX100 to reboot? If this is not normal will a software update correct it? thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.