BFS key alway flashing

[Garbear]

Help Please, I have a Option 11 Rel 25 with a 2616 that has a BFS key that is always flashing for an analog local, why? I have tried reprogramming the key, no change. thanks for your help!

 

[PERRYPJ]

What do you mean analog local

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[Garbear]

500 Telephone set

 

[RyanEOD]

Can you post a PRT of the TN you have the BFS key on please?

 

[GHTROUT]

It sounds like normal operation. Press the BFS key twice and I bet it goes out.

--
GHTROUT.com - Help for Nortel Meridian/CS1000 System Administrators
--

 

[Garbear]

DES RECPT
TN 012 0 00 08
TYPE 2616
CDEN 8D
CUST 0
AOM 1
FDN 5464
TGAR 15
LDN NO
NCOS 6
SGRP 0
RNPG 0
SCI 0
SSU
LNRS 16
XLST
CLS CTD FBD WTA LPR MTD FNA HTA ADD HFA
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTA SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDA CFXD ARHD FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN

CPND_LANG ENG
RCO 0
EFD 5464
HUNT 2200
EHT 2200
LHK 9
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 5400 0 MARP
CPND
NAME Stacey McConnell
XPLN 23
DISPLAY_FMT FIRST,LAST
01 CFW 4 5474
02 TRN
03 MWK 5464
04 RGA
05 AO6
06 MSB
07
08 SCR 2200 0 MARP
09 SCR 2201 0 MARP
10 ADL 16 916046889090
11 ADL 16 918884282673
12 ADL 16 918009993526
13 ADL 16 918003610198
14 ADL 16 918003610198
15
16 BFS 015 0 00 13
17 BFS 003 0 00 14
18 BFS 010 0 00 09
19 BFS 015 0 00 12
20 BFS 012 0 00 09
21 BFS 011 0 00 02
22 BFS 011 0 00 04
23 BFS 011 0 00 06
24 BFS 011 0 00 11
25 BFS 012 0 00 13
26 BFS 011 0 00 05
27 BFS 011 0 00 15
28 BFS 012 0 00 12
29 BFS 008 0 00 14
30 BFS 011 0 00 08
31 BFS 011 0 00 10
32 BFS 010 0 00 04
33 BFS 004 0 00 02
34 BFS 003 0 00 12
35 BFS 011 0 00 09
36 BFS 010 0 00 05
37 BFS 007 0 00 08

DES MILL
TN 010 0 00 09
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 5489 0 MARP
CPND
NAME Cliff Helmkay
XPLN 23
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 5464
TGAR 15
LDN NO
NCOS 6
SGRP 0
RNPG 0
XLST
SCI 0
CLS CTD DTN FBD XFA WTA THFD FNA HTA ONS
LPR XRA AGRD CWD SWD MWA RMMD SMWD LPA XHD SLKD CCSD LND TVD
CFTA SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
BFTN 012 0 00 08
RCO 0
PLEV 02
AACS NO
MLWU_LANG 0
FTR CFW 4 250
FTR PHD
FTR FDN 5464
FTR EFD 5464
FTR EHT 5464

BFS Key 18 on reception telephone continues to flash (pressing key twice still does not fix it). Any Ideas? when we press the key it calls 5489.

 

[janaya]

just for grins, remove it from the receptionist phone to see if it quits flashing.

if it does, put another line on that bfs and see if it starts flashing. If it doesn't remove that and put the original TN back on the BFS key to see if it flashes.

 

[Garbear]

You and I think the same...I did that very senario and flashing went away when I programmed a different TN, and it came back when I put the original TN back into key 18.

 

[janaya]

Ok, so the problem is something with 10-9. if you tried with another TN and it didn't flash, the only thing I can ask is did you use another 500 set?

so the next thing would be to out 10-9 and rebuild it to see if something is wrong with the set (10-9).

 

[Garbear]

Thanks, I will look into that.