I have an 3641 IP Wireless Handset. It is currently showing:
Error
RADIO/RADIOMGMT.C
LINE 013333
0000000 0000000
I cannot locate this error meaning on any AVAYA site or Cisco (AP)
I am trying to determine if this specific to the handset or the Radio at the AP.
Please advise.
Thanks,
Phonemanrwj
One of my IP handset was receiving a radio.radiomgt error
today. I tried to google this error and looked on the support.AYAYA.com web site but could not locate any info on it.
Is this an internal operational error (like flash config), or a firmware/battery issue?
I reboot the phone and the...
I have 2 new users - 6739 and 6740
I added them in modular messaging
After the users personalized the mailboxes I added the cov path (500=4r->h99)
what is happening though is when either of these extensions are dialed, after the 4th ring when the MM answers it is as though whomever is dialing...
In CMS Supervisor r13
I am currently printing daily VDN Report Interval.
I know there is a way to set a script up to schedule this to be printed automatically.
Only I can't recall the correct code to enter.
Any help would be appreciated
Had tried that once before forgetting to select CDR privacy
on all extensions that were deleted from e-cas.
Once a call was made on them again CDR was automatically placing them back to a licence. I think this time the issue was isolated and we corrected it this time.
Thanks
My Veramark e-CAS is sending out a system alert that it is within 5% of its model size. I have cleared out part of the archive files but continue to receive these alerts.
Has anyone else experienced this issue and of a known fix?
Thanks,
Phonemanrwj
I have an AVAYA 9640 IP phone set I am trying to test in my PBX.
I upgraded the 46xxsettings file and added the appropriate
96xxupgrade file to my HTTP server.
The phone loads all the firmware settings and receives an IP address from my DHCP server.
When it arrives at the discovering window...
I saw in another thread (don't remember the number)
As long as the framing is B8ZS-ESF the 64k data calls should work.
This information is not correct?
I have 2 vendors telling me they have this set up and working on their PBX's with Verizon PRI-ISDN service and that it is in fact working...
Mitch,
Not confused but frustrated.
I have the NT1 CSU and followed that wiring diagram to the exact detail but the board fails test 621 and each port 621 and 626 when I test to clear the alarms and errors that are generated.
I want this to work as if I did have the ISDN circuit through my...
I did search.
Already looked at thread 6270, it did not offer me the info I am looking for though.
I need to know how to cross connect these ports so I can get them into CSU that will interface between the S8710 and the Polycom.
Do I need to change anything on the backplane or will a
straigft...
Using a TN2198 U type interface what pinout do I use off the 25 pair cable to get my port.
Are the ports supposed to be Data Mod WCBRI or Station WCBRI?
will I need a separate anaolog line for voice or will it work with just the BRI
I have programmed the TN2198 in my CM 3.0 8710 switch.
I gave each BRI extension a SPID #,
since we are looking to use this for video conferencing.
Currently I have set up 4 ports with 2 end points on each port.
When I test the board it fails test 621 with an error code 1. Each port is failing...
Where can I get the 96xx settings file from.
Everything I have read tells me it is included with each phone.
Unfortunately it is not pre-loaded on the phone sets and I have not received any cd's with the phones.
If anyone knows it would be greatly appreciated.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.