Thank you very much for your help unclerico, those links were helpful. I was able to successfully configure the 3640 as an access router. I quickly learned having the async module in slot 3 wasn't the best option and moved it to slot 0 which gave me the line numbers I required. I was also...
I think I may have posted this in the wrong thread before. I think I am in the right place now..
I am trying to set up a Lab (CCNA) using the following equipment.
1. 3640 as an Access/Terminal Server ( I will connect to this via console, I won't access via network)
2. Two 2600 series Router...
I am trying to set up a Lab (CCNA) using the following equipment.
1. 3640 as an Access/Terminal Server ( I will connect to this via console, I won't access via network)
2. Two 2600 series Router
3. One 2800 series Router
4. Another 3600 router
5. 3 Catalyst switches 12 Port, two 48 Ports...
Thanks for all the responses, fortunately I have a test Lab environment in the office where I can set-up the Cisco Lab. I have most of the tools mentioned to work with.
Update:
I was able to erase all the routers and switches and start from scratch.
I configured the 2610xm as the Frame Switch...
Thanks for the info. I will start setting it up tomorrow and erase all the current configs on the routers.
I will use the links you provided to configure each router.
I will let you know how it works out. Thanks again.
Hi CiscoGuy33, Thanks for the info. it gave me alot of direction. I was able to scrounge around in our facility and I found a 2621xm, with (2) WIC-2T Serial modules in it. One in W0 and the other in W1, so that's a total of 4 serial connections from that 2621 router.
1. Can I use the 2621xm as...
I am a newby to the CCNA, I have been doing all the readings and practice exams. I now want to set up a Lab and have access to the following devices,
1. Can I set-up these equipment as a CCNA Lab
2. What kind of cables do I need to inter-connect the routers given the available modules/ports...
Hi Henry, We running multiply CS 1000M's using NICE perform and Symposium Link (CTI) or now known as CC7 Toolkit. The option we use to record is DMSIP (Dual Media Stream IP). The phones are configured with the on the call server with the following features:
ICR = Allowed
AST = 0 1 (for keys 0...
tnice:
The end result was NICE wrote a script to correct the issues with the SQL database. After that was implemented we were able to retrieve and playback archived media. Now we are working on a new set of issues.. it never ends...
Has anyone ever ran the following command in the pdt> load, on release 5.5? If so do this impact the system in anyway? Trying to gather some information for a vendor and just want to make sure this is not service affecting in anyway.
******* See Commands below: *******
To verify the phone’s...
Can someone remind me where to look to see the codec that the IP phones are using, I remember seeing this somewhere, but I can't recall if it was in element manager or in the PBX itself. I just want a printout to verify the codec specific 1120E/1140E phones are usings.
Thanks much.
Thanks Bigindian65, I was able to find the ones related to Symposium link, TM, Signaling Servers and Callpilot. I have to go hunting now for EOL's for line cards etc. Appreciate it.
Hi all,
Can anyone assist in pointing me to a link or support page that has the list of EOL applications/hardware for Option 81C,CS1000M, Callpilot V4,V5, Symposium Link V4.0,V5.0, Vxworks Signaling Servers etc. We are in the process of justifying upgrades and I just need the dates and...
It's funny, about the host file, that's what NICE Tier 3 support suggested doing. That did solve our issue but it made things better. We are now not seeing any TSM Failures on archived media from EMC Centera. The media gets retrieved successfully. Now after updating the host file...
Not sure if this helps, but I think the easiest way would to configure a set with "Auto Answer" active and have that set as a recorded user. So the mobile user could just call that set then call the other party and everyone would get recorded by the set configured on the system. If this is...
Just curious if anyone has implemented NICE Perform 3.1 with a CS 1000E HA with SMG's. We are currently running multiply CS 1000M's and will be migrating all our IP users to a CS 1000E HA with SMGs at the remote sites. I have a couple of concerns with NICE.
1. How to move from a distributed to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.