Search results for query: *

If a call is placed on hold from a VoiP phone, can an ATA with the same line resume the call? Researching Cisco and other documentation, I believe the only way would be to Park the call from the VoIP phone. To resume the call, the Call Park code would then be entered from the ATA line. I tried...

I didn't realize pbxinfo.com was no longer around. I think you're referring to another good forum I'm a member of, your name sounds familiar. What's cool about that one - it still has a 1A2 forum! To the OP I'd recommend a LinkedIn, Indeed, and/or other job site profiles if you don't have one...

Entering '0' before 11 digits? I use 10 digits and can forward externally, or have the ring no answer forward externally.

My customer wants to be able to 'lock' his phone. He said previously when going off hook, he'd need a PIN for the call to proceed. He had forgotten his pin, and said it was reset (it would be by our dept. but I can't find a related work order) so he could use the phone. It sounds from his...

It sort of sounds like the pair is also bridged elsewhere, like to another jack. But if you changed pairs and simultaneously ruled that out there's some other reason.

Great the system reloaded from the HD. From what I recall about the 9006 that looks good. I wonder what caused the situation in the first place? Next would be a backup to the MO drive?

I remember those days - more than once where the processor would flash 3 bars, then keep repeating the process. I had times where the RMX backup wouldn't load from the DAT, and had to run the cleaning tape through a few times. At least this system has a MO, that must be much more reliable and...

The symptom with the time and date not set I thought was bars on the displays of Optisets. Glad someone with knowledge of the system came in. Sorry about the wrong AMOs. I recall years ago I had several Mod 30 9006s where the hard drives started getting quite noisy. Suspecting the worse - I took...

It's been many years since I've worked on a Siemens system but I've experienced that on a 9006 system when the hard drive was bad or 'In defect'. There's a way to effectively reset the status and put it back in service as long as there's not a hardware error, It was CHA-DSSU... I think followed...

Why does the diagram show voltage? The 2 pairs should be transmit and receive. I think it's the BCSU command in the 9006 that set the options (wink, immediate, etc.) Might be CHA-BCSU, TMD (TBL would be the card type). Sorry I can just go by memory, I don't have much trunk documentation.

Not familiar with the 2x8 system - but if I recall correctly, the 9006 (which the card looks like it's for) has all the T1 E&M options, such as Wink, Immediate, Delay, etc. You could just flip the transmit/receive pair between the 2 systems, and set one to supply clocking, other to clock off of...

You're welcome. So you can hear the DTMF 00, then audio when you speak? If you're hearing the 2 tones, maybe they're too short for the Bogen to recognize. I don't know if there's a setting in the Openscape system to adjust for the length of the tone, or what do do if you're not hearing them at...

If you have a buttset, can you monitor the analog line on the RJ11? That would confirm if the system is in fact sending DTMF 00, then audio when speaking. Or in place of the paging interface that is 'answering' the ringing analog line, answer with the buttset and listen.

We recently started deploying Cisco 9841 phones. The Line Text Label does not appear, just the +1NXXNXXXXXXX number. My co-worker informed me when adding a 2nd line, the label will then appear for all lines. I wonder if there's any other configuration setting that will allow the label to appear...

Interesting a Mod 50 is still in operation. If you have some good 3.5" diskettes on hand one command you may want to do is (I think.. just from memory) COPY BACKUP CNFG_9005.6.84. which will backup the configuration to the diskettes. Depending on the CNFG size, it may be more than one diskette...

Didn't think so since the same version of Jabber does transmit DTMF on my work pc.

Ended up buying a USB headset, that works. I also noticed with Jabber I can't transmit DTMF, whether the headset is connected or not. As before DTMF is fine with Google Voice as well as the internal microphone.

Good deal! You're welcome. I finally got it off the older of 2 old laptops. I sent you a PM.

I may have found the Adix programmer on an old pc, zipped it but upload progress at 100% stays, maybe it's too big at 20 meg. Edit - it's not attaching after completed.

Here is the .msi for the Icon programmer, required for ECS systems, but you may need the older Adix programmer. I was able to use the Icon programmer on some Adix systems depending on the release. Sorry I looked for the older Adix programmer but couldn't find it. I don't know if this file will...