Search results for query: *

slight problem, this is the response i get: Result of the command: "access-list acl_outside deny ip 0.0.0.0 0.255.255.255 any" WARNING: <acl_outside> found duplicate element Result of the command: "access-list acl_outside deny ip 1.0.0.0 0.255.255.255 any" ERROR: IP address,mask...

thanks ^^

Hello, I have an ASA 5505 and I'm trying to help get the company PCI compliant. I was told I need to set the 5505 to filter the IP addresses on the bogon list (which I have now) but I don't know how to do that. can someone help?

naw, i set the attendant to the receptionist when i did upgrade our vm from a startalk 2 port to a 16 port fiberNAM. i upgraded the VM a month before I upgraded the phone system.

Hello, I have a MICS 7.1 with a FiberNAM 4.1, and I was wondering if there was a way I could set the system to automatically change ccr's by time of day, like you can do with a call pilot. We have different paths set in each tree: tree 1 - path 3 goes to tech support hunt group, path 4 goes to...

our old software version was 2.0 which doesn't have hunt groups, so it wasn't a hunt group issue. before, when someone from aa dialed 221, it only rang the receptionist, who was on a 221 answer dn. it still went to the vm of 221 though. i know, it sounds impossible, as i'm dumbfounded by it...

you say impossible but this is the way it was set up. if from another phone internally, dialing 221 would ring the phone, but if someone called into our AA from an external number, and dialed 221, it would only ring the receptionist, who has a answerDN for 221. 221 itself would not ring

Hello everyone, Yesterday I did a complete upgrade and full reprogram from a MICS 2.0 to 7.1, and I'm having a small issue. Before the upgrade, if someone dialed extension 221 (the owner) via the AA, it only rang to those that have 221 as a answerDN, and not 221 directly. 221 could still be...

no issues before, that's what confuses me. also, after this happened, we powered down and back up again and didn't loose programming at all. Yea, the upgrade will definitely help out. just gotta get the two digital T1's installed.

thanks everyone. i set the prime set per line to 233 (the receptionist). we are running out of open ports on the AA/VM which is causing this issue. Yesterday I ordered a FiberNam with 16 ports/1000 mailboxes so once installed this should alleviate any issues we are having. Here's a weird...

Answer lines is set to yes. Also, the attendant is 233, who has an answer DN for 221 (she's front desk and also his receptionist). also, we just found out that our 800 number wasn't redirecting to our local numbers like it should, so that should account for the continual ringing sometimes...

it's a 2. I have a 4 upgrade module that I can install. would i need to do anything specific or just unplug the old and plug in the new? also Dewey, I'm not quite understanding what you are saying. I get the part that instead of going to the AA, the line is going to Ext. 221, but I'm not...

Hello everyone, I'll start out with system specs: BNR Mics 2.0 Working Issue 4.05 ST Flash 1.7.00 We have been getting reports that recently a few times per day people call in, but instead of getting the AA, it just rings and rings. Also, daily now our boss (Ext 221) receives these ring in...

I appreciate your comment but it doesn't help me. I need a resolve, not an explanation of what it is. I don't mean to come off as rude so if I did, I apologize.

Hello everyone, The company I work for recently purchased an ASA 5505 to replace our crappy Netgear Firewall/VPN router (was having memory leak issues inherent to the specific model). I have it set up and working, and all of our stations can access the internet, but when trying to use WLM...

Thanks JcBWF, I was thinking that was the case, but wanted to double check before purchasing.

Hey again everyone. I was wondering if there was an adapter or splitter I can buy to have two handsets connected to one phone. Right now we use CN Netcom wireless handsets attached to our T7316 phones. What I'd like to do, is split the line going to the wireless handset, so that it goes to...

Doubt a KIM is going to work on MICS 2.0.""" can anyone confirm or deny this?

Ok, sorry about that. I went into system prog and there was "cap assignment" but no KIM setup. within Cap assignment the first one is "CAP1:None". when pressing on change it gives me three underscores, but only lets me put in two numbers when trying to enter an extension. Do I not enter an...

yes i do, just don't know in what specific area I would setup a kim for said extension