Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. mike1flores

    PLAR rings IP phone every 10 minutes

    Remove the jumper from the 110 or 66 block before it ties to the elevator and see if problem stops. I had the same problem and had to get the Vendor to program the system on his equipt once he did the problem stopped. His equipt is causing the problem. Vendor for the elevator need to fix.
  2. mike1flores

    How do you do a call transfer on an analog phone using a VG350

    change the maximun number of calls from 1 to 2 leave the busy trigger set to 1 dont change anthing on the cli even though cisco recommends... change only on the Directory Number Configuration. Hope that helps
  3. mike1flores

    IP phone intercom and overhead paging simultaneously with Cisco CM?

    I have a new Hospital working on a VG350 and and a Valcom V-2926... Works like a Champ. Highly recommended!!!!!!!!!! voice-port 0/0/0 description Valcom Paging Port ! voice-port 0/0/1 ! voice-port 2/0/0 timeouts ringing infinity ! voice-port 2/0/1 timeouts ringing infinity !
  4. mike1flores

    1 way audio when transfered to Vocera -sip trunk

    In CM device trunk select sip trunk having problem uncheck Media Termination Point Required Once that was unchecked, calls into 7975 and 7962 could transfer with no 1 way audio

Part and Inventory Search

Back
Top