Sorry I do not have time to look at this but a good place to start is to relize that the vpn tunnel is actually considered "OUTSIDE".
So look at your acl and keep in mind the the vpn is outside.
So routing gateways and acls are all subject to outside routing and rules.
Since you have no flash to hold a config you can boot from tftp to move on.
I have done this in a pinch were there was not enough flash for the IOS image but enough ram
Hey all,
I need some documents and config examples for using radius (IAS) for vpn on a asa 5520.
I need to off load as much configuration as possible to ad user attributes. IE login time, groups, static ip address....
Reason is I need to keep the twits out of the Firewall I figure if I can...
Yes we are using the ASA's for VPN end points. It seems that Cisco is not making the 3000 series concentrators. Our concentrator "poped" recently. So the answer is /are ASA's with the k9/vpn bundle.
I read briefly about the contextual firewalls. To be honest I am alittle intimidated about it. Mainly from an operational and administrative stand point.
But an answer is answer. Can any one point towards a good document to put this implementation in perspective? with the dual homed dual...
Currently I monitor VPN by having a syslog server in place.
The configuration is a linux server Fedora with syslog-ng, Mysql, and php-syslogng-mysql.
Currently this model lets me know when contractor / consultants vpn in. THe syslog message from the pix tells me When howlong and how much...
outgoing is easy What the "powers that be" want is I guess i could call it a multi-homed DMZ.
Simply if one ISP goes down we want to have a presence on the other ISP with our DMZ and VPN access and also all the while have a presence simultaniously.
jasondvox (TechnicalUser) Feb 21, 2008
I am in a fact finding, developing and designing stage.
Build of Materials:
1 Cisco 4506 with supII plus
2 Cisco ASA 5520's with ASDM 8 (4 port gige ports each)
2 ISP's (Bonded t1's @ 3mg, ISP w/eithernet @10megs seperate wan Subnets IE 12.240.X.X and...
AS for the ISP Ports. I can't imagine a phone monkey playing with the ports every other week. Who knows I have been more bord before!
As for the fix up.. Hmm would not be the first time fix up was not all that usefull.
I removed all h323 and sip type fixups.
It was mentioned something...
We use cisco for our voip. We have 3 office at home users.
Each of these 3 users have a pix 501 that connects a vpn tunnel to our concentrator (3005). I think the phones are cisco 7900 series which are connected directly to the 501's.
One of these Three little pigs experinces an issue where it...
Aggreed with plshlpme.
Start at the router and ping the areas that you are speaking about. If you can ping the next hop then ping past and see if the route is correct.
Dude
Just start over. Take your time. I have found that alot of people start confusing their configs when the vpn tunnel does not come up right away.
once you are confident with the config and fixed your policies then if you make a correction use the clear crypto ? options ( somtimes the...
Here --- sh ip interface brief
#sh ip interface brief
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 12.46.232.33 YES NVRAM up up
FastEthernet0/1 unassigned YES NVRAM up...
Dude
in the process of changeing the register for password recovery 0x2 what ever you may have made a mistake.
Often the extra or wromng integer causes the baud rate to be something other then the default. Try them all!
keep trying the baud rates.
keep trying the baud rates.
keep trying the...
Has anyone Migrated/moved to an ASA 5000 series appliance?
Our Pix 515 is EOS in may and looking to replace it with another device, either pix or ASA.
So before I purchase I would like to know any yeas' or nahs'
Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.