Search results for query: *

Hi Guys, I want to have a virtual number that can be remote forwarded via telecommuting, but it seems not to work. It works if i do a normal station on a port, or do an IP station. But if the IP station is not connected i can't tell what location this number is for. So even if it is a dutch...

Hi Guys I have a problem with a G650 in combination with some analog boards TN2215, phones and faxes connected to this board don't ring, looks like the ringgenerator not works corectly. Anyone seen this before, or know how this can be solved?

Hi, In the mail i recieve from the cisco Unity, when i put on "Include a Link to Cisco PCA in Message Text " there is a wrong webaddress. Does anyone knows how and where i can change this address (globaly, not per user) thanx,

can alarmtraq also send major alarms through sms messages?

I checked and the catalist has a WS-P4603-2PSU module connected that deliveres the power (on the signaling wires 1,2,3 and 6) You stated that the WS-X4148-RJ45V would work for Avaya? but if i look in the specs it says: WS-X4095-PEM(=) Cisco Catalyst 4000 Inline Power 10/100BASE-TX Switching...

Thanks guys, helpfull information. Exporting can handy be done in CMS indeed, importing couldn't and the callflow extract tool looks good but for a one time need a bit too expensive. I played a bit with the scripting of the CMS itself and after some digging i found out what to do and wrote a...

As we want to do some changes in the numbering plan also the data in CMS need to be changed. This can all b done by hand but is a lot of work. So is there a way to export all agent number from the dictonairy to a file, modify this (as put 1 digit in front of the numbers) and import it again to...

I have some avaya 46xx phones that i will connect on a cisco 4006 switch. It seems that this switch send te power over ethernet in the endspan methode (so the power over the signaling wires 1, 2, 3 and 6) This seems not to work for the Avaya 46xx phone Does anyone knows if this can work with...

I found out already. At first i had to use version 13 of the client as the 12 doesn't seem to work with ssh. But also client v13 can be set to use a version 12 server so that is no problem. From that point the server did connect with ssh, but didn't connect the application. What happens is that...

You can do a list trace station xxxx if you want to check a station. You see everything he types and also what trunk the call choose to go outside

Does anyone use SSH on a window client to the server?

Hi All, I tried to get the windows client to connect through ssh with the cms server (cms v12). I had the v12 client and with this i was unable to choose the ssh option, than i installed the v13 client and with this i could say that i want to connect to v12 CMS and than i could use the ssh...

We have the same problem and don't know what causes this. I also solved it by using the trunkcode in the remote cover instead of a 0 or a 9