Search results for query: *

Thanks, it worked

I have a BCM200 R4. unpached system. I want to patch it with the latest patches. On Nortel web there is : BCM.R400.SU.SYSTEM.018_BCM_4.0 and BCM.R400.SU.DESKTOP.013_BCM_4.0 . Dependensies say that System has to be done befor Desktop. In system there is a dependensy stating that...

Could be a patcj issue, BCM.R400.SU.SYSTEM.011_BCM_4.0 Expansion Module for IP Phone 1100 series is now supported with BCM4.0 Q01578700-03 So if you don't have this Smart update it won't work. N.B there are dependencies

Using the BCM UIP Monitor will not help you. What you need is a Wireshark trace, with a filter on port 5060, you would also need a hub else you will se nothing relevant in the trace. You could at the same time use BCM Line Monitor to check if the BCM is using the VoIP line when dialing out on...

It all depends on what your SIP provider does. If your looking at SIP end user accounts, where each account would register to a Providers SIP server - then the answer would be, the BCM50 can't do it. The BCM50 cant do REGISTER to a SIP provider. If you are looking at SIP trunks - then the...

I had exactly the same problem at a Danish site with a new BCM400 Rls 4.0. It also was powered down for the weekend and on power up all IP phones worked fine. I however didn't dare to use it at the customer site. It wen't back to Nortel as a DOA.

This is stated in Task based guide BCM50 Rls3 Using the MeetMe Conferencing application, callers can establish a multiparty teleconference up to 18 participants. The conferences can either be wholly internally or a mix of both internal and external callers. Access for internal callers is via...

Solution, Something wrong with my Laptop, switched to a Stnad anolre PC, and the licenses loaded directly. Very strange, but happy that it was resolved

I've done a Level 1 reset on a BCM50 Rls.2 When you do this the keycodes are reset. In order to apply them again after a level 1 reset you need to do the set time and date and timezone, then you should be able to apply the keycodes again. In my case when I try to load the lic-file nothing...

Yes, but I only get Quick Configuration when I log in. Here you basicly can do nothing. I need the Main menu, but I can't see it. So basicly I'm stuck at the moment. I will try to get new hardware to see if the Advance Replacement parts from Nortel was faulty. This is all that can be done at the...

Acewarlock, Thanks for trying.

Iv'e done that. It's actually the same scenario, >error 53005. I seems that a lot of services are stopped, when you look in service manager.You can't access the majority of the telephony features using Element manager. You can't do a Cold restart of telephony becuse it tells you that it is...

Background: Did an upgrade from 3.5 > 3.7 > 4.0 , this worked fine. After that we discovered that we had a faulty Basic Tray with leaky capacitors and a not hardend MSC-card. This was found because several services was going up and dow all the time. Required new Basic tray and MSC, tried to...