Search results for query: *

I think I finally figured it out. I didn't know of a way to do it all within the router but using RRAS on the FTP server (which was present for VPN clients anyway) I was able to statically bind the specific gateway for each NIC. As a result, the FTP server now successfully answers on both...

I found the reason why I couldn't hit the FTP server on the laptop. Windows Firewall apparently has three separate profiles under Vista that wreak all manner of havoc. Once I turned those off, the FTP pass through worked like a champ. However, my problem remains of setting up two separate...

Here's the current config. Fluff items (such as the login banner) have been removed: ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname TestExternal ! boot-start-marker boot system...

Yep, no problems browsing the net from the laptop.

I setup a laptop running a small FTP server and adjusted the static NAT statements to match the laptop's IP. No joy regarding FTP port forwarding. So what else am I missing?

I thought the gateway might be an issue. The FTP server is also currently hosting an RRAS server for incoming VPN clients. The gateways on the FTP server are configured to point to the DSL line with a metric of one and to itself with a metric of 20.

Let me give some background on the situation: This T1 circuit we have will replace our current DSL line in our production system. Right now we have several systems that FTP data through the DSL line to an FTP server in our DMZ. As there are some systems that cannot be remotely managed, to...

Thanks for your reply, burt. I ripped out the existing mapping and removed the ACLs for the serial and internal interfaces. Port 21 is statically mapped to the serial interface pointing back to the correct internal IP. However, I'm still unable to access the server through the external IP over...

Hello all. I have an 1841 router I'm attempting to setup an FTP port mapping through on a T1 circuit I recently acquired and setup. The circuit is working fine however my port mapping refuses to work and I'm not sure what exactly I'm missing. I've setup the proper interfaces as inside and...

We don't have any hosts setup on this particular network yet so no firewall is in place. I'll be setting up PAT shortly after the line is configured and running.

Good morning everyone, Here are the line configuration details as given to me by our provider: Configuration Details: IP Classless: in global configuration LBO: 0.0 (If cat5 cable < 50 ft. (default in most units), if > next setting (7.5)) Line Coding: B8ZS (Bipolar 8 zeroes substitution) Net...

I'll post the configuration information given to me by our provider on Monday as I left it on my desk in the office

Afternoon all. I'm much the novice when it comes to configuring WAN connections of this type so please bear with me. I was able to get the controller working using the "card type t1 0 1" command listed above. I have the configuration information from our provider on what the configuration...

Good morning. I recently ordered a 1-port VWIC MFT T1 card for a T1 line that was installed in our building. I know that the 1841 will only support data applications with this particular card and that's fine; there are no plans for voice over this connection. Whenever I install the card into...