Search results for query: *

Not sure why you haven't gotten a response, but here goes: Connect to the Switch via the console port. Power the switch on. When it says "Press and hold the <spacebar> to enter the bootrom" hold the spacebar. You should shortly get to a "BootRom>" prompt. Type "config none" and press enter...

Downgrading the 5505 to 8.2(2) seemed to fix the issue.

Yes, I used the wizard on each ASA. The 5505 should be the default gateway on the 192.168.11.x (192.168.11.1) network. The default gateway on the 192.168.2.x network (192.168.2.1) uses the ASA5510 as its default gateway (ASA - 192.168.2.254), so it should send anything it doesn't know how to...

I would try looking at the output of "show boot" through the CLI, or check the boot options under Configuration > Device Management > System Image/Configuration > Boot Image/Configuration in the ASDM. Make sure that the 8.2 image is set as the 1st boot image and that the latest ASDM image (6.3)...

I have an ASA5510 and a 5505. I am trying to get a site to site VPN set up between them. As far as I can tell, I have it set up correctly, and the VPN seems to connect, but traffic doesn't seem to pass through the tunnel. I cannot ping hosts from either side of the tunnel to the other, I...

If someone could point me to a national Nortel distributor (other than AT&T), or an online distributor that will actually be able to provide me pricing for support and / or updates, I will gladly get the updates for the WSS.

Unfortunately, upgrading is not really an option. The vendor who sold us the Nortel Equipment is no longer in business. The only other local vendor for Nortel equipment (ATT) cannot even tell us how much it would cost to get support contracts. I tried with ATT for over a year on our BCM to...

I have a Nortel WSS 2360 managing 5 2330A access points. We have many Windows XP, Mac, Linux, iPhone, and other devices connecting to the WiFi just fine. I cannot get Windows 7 Laptops (Lenovo, Intel WiFi Adapter) to connect to the WiFi. I believe we also had this issue with a Vista Laptop, but...

I am looking for some help, I am trying to set up a Nortel SR1001 as our router / firewall with a T-1 connection. I have a /29 block assigned from the ISP: XXX.XXX.213.113 - XXX.XXX.213.118. With the other two T-1 connections at our company, the ISP, which is different for each T-1, provided...

Hello, We have recently switched to a BCM400 3.7 from an Avaya system. When a call comes in, it is picked up by the automated attendant. If the caller dials 0, the call goes to the operator. Sensible so far. The operator has 3 intercom buttons on her phone. What we would like to have...