Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. HutchComm

    Nortel 11c Add Line Appearance - No Ring

    AHHH HAA ! Thank you for the fast response !
  2. HutchComm

    Nortel 11c Add Line Appearance - No Ring

    I have ok idea of adding the actual line appearance to the phone. The issue is making the line only light up and not ring. It's on a Option 11 and Phone is a 3904. THanks for the help!
  3. HutchComm

    Hicom 300- Removing D.I.D.'s from PBX

    Thanks for the advise !!! keyset6 ---> I was with you on deleting them from the dial plan. So I looked them up in the switch and found that they were reserved (not been made extensions either) and just went back and delete- dpln on the two numbers and now issue is resolved. Thanks again...
  4. HutchComm

    Hicom 300- Removing D.I.D.'s from PBX

    I have a Hicom 300 with 3 PRI's that has about 3000 DID's but not sequiental. Some how a few years before me,, a few numbers were added that the facility does not own and are located at a local bank. So how do I remove these numbers from my PBX? I would appreciate any help. Thanks Jason
  5. HutchComm

    Hipath 3750 Forward to Phantom

    Thanks for the information.. I will be at the second site tomorrow and will try this out..
  6. HutchComm

    Hipath 3750 Forward to Phantom

    I can't seem to get a station to forward on RNA,Busy, to a Phantom that is programed on that phone and then on to PhoneMail. With the Hicom 300, There is no issue like this. FYI: ext.-xxxx is mulap and physical port ext.-xxxx is mulap and virtual port Both extension on same phone...
  7. HutchComm

    3750 Lost LAN , Reboots System

    Its v4.0 ,, Tech support has no clue why its dropping. I have IT dept. monitor errors for port and nothing on their end.
  8. HutchComm

    3750 Lost LAN , Reboots System

    Here is a weird one.. I have a 3750 at a remote site that is tied to our CORNET off our HICOM300.. Seems The 3750 Looses LAN conection and we can not log into it. I have been told to just remove the patch cable from the 3750 network port and plug back in and it will re-establish link.. Well it...

Part and Inventory Search

Back
Top