Search results for query: *

Yes. ********************** Chris A.C, CCNA, CCSA **********************

And your hyperterminal settings are??? ********************** Chris A.C, CCNA, CCSA **********************

If you are adding it to a switch stack then you really should wipe it's config completly (wr erase / erase start). It will then join the stack as a stack member and take the config from the master. Chris. ********************** Chris A.C, CCNA, CCSA **********************

I don't understand what you have a public /26 but you are just NATing traffic to the outside /30 address! What you need there is a firewall which would handle all your NAT, *or*, put the public /26 on a loopback interface and then just have the internal range on your Fa0/1 interface, NATing your...

4) Bytes (not bits). Chris. ********************** Chris A.C, CCNA, CCSA **********************

term no mon ********************** Chris A.C, CCNA, CCSA **********************

From a clinet PC can you dig or nslookup any DNS server? When you do, do you see NAT translations on the router? Have you tried logging any drops on the acls? errr ... no! Chris. ********************** Chris A.C, CCNA, CCSA **********************

You would need to manually change the DNS settings so that hostnames map to address space on your other ISP. Regards, Chris. ********************** Chris A.C, CCNA, CCSA **********************

And this isn't really the correct forum for routing issues. Chris. ********************** Chris A.C, CCNA, CCSA **********************

There is nothing "wrong" with the routing here. Your ISP is correctly routing the traffic to the correct network, in this case BT. The issue is on the BT network. 8 10 ms 9 ms 10 ms core2-gig9-0.telehouse.ukcore.bt.net [208.185.15 6.218] 9 11 ms 11 ms 10 ms...

Try posting your config? Chris. ********************** Chris A.C, CCNA, CCSA **********************

http://www.cisco.com/en/US/products/hw/routers/ps233/products_password_recovery09186a0080094795.shtml ********************** Chris A.C, CCNA, CCSA **********************

If you are on a remote network and not even physically connected to that router, how exactly were you planning to do it over a console cable? If you are close enough to attach a console cable, then you are close enough to patch lead into the ethernet port and do it properly. Chris...

Where are you trying to trace to? 68.75.10.12? Chris. ********************** Chris A.C, CCNA, CCSA **********************

68.75.10.12 255.255.255.255 Chris. ********************** Chris A.C, CCNA, CCSA **********************

?? If the router has an IOS on it then why not connect a PC / laptop to it via ethernet, set up a port and download the IOS over TFTP? Chris. ********************** Chris A.C, CCNA, CCSA **********************

ADSL is standard Asymetrical DSL (upto about 8Mbps). ADSL2 and ADSL2+ is just faster ADSL (upto about 24Mbps)and ADSL Max is just a marketing term for standard ADSL upto 8Mbps services. Chris. ********************** Chris A.C, CCNA, CCSA **********************

http://www.cisco.com/warp/public/130/xmodem_generic.html ********************** Chris A.C, CCNA, CCSA **********************

If those users only have a default route of the Pix 501 and you are hoping to use that as a gateway and then route off that to your other network then it won't work. The Pix is NOT a router. Any traffic entering the inside interface must exit via another interface. It will not route traffic back...

www.mysite.com IN A x.x.x.x eg. www.tek-tips.com. IN A 216.45.19.33 Chris. ********************** Chris A.C, CCNA, CCSA **********************