Has anyone connected Shoretel to Mitel using SIP trunks?
We are trying to set up a test switch to integrate with a Mitel network. If anyone has any tips it would be greatly appreciated.
Thanks in advance
Hello all,
Has anyone connected Shoretel to Mitel via SIP. We are setting up a test system. If anyone has the setup on the Mitel side it would be greatly appreciated.
Thanks in advance
You might try setting the baud rate to 14,400 and turn off Error Correction Mode on the fax machines. No guarantee this will work for you, it has helped on some of our machines before. We are switching to a fax server to try and eliminate these issues.
Hope this helps.
FrancoisOuiment,
We have installed Xmedius and we have the incoming faxes working, but when we try to fax out we get an error message saying the line is not available.
Was wondering if you may be able to tell me what we are missing.
I am using NuPoint. I have it set up now with a MWI key programmed on the secretarys set so she can check the messages from her phone and still save a message in the bosses mailbox if needed. However it would still be good to know the first method I mentioned. Thanks KWB.
I have set up a reroute to another extension and am wanting voice mails to go into the extensions mailbox that I am rerouting to. The call is rerouting but never goes to voice mail on the other extension. 3300 8.0.8.8
Any help would be greatly appreciated.
Thanks
You might try upgrading your LX to at least 8.0. When I upgraded to 7.1 4.9 I had lots of failed faxes. When I upgaded to 8.0 fax machines started working a lot better.
I have had the same issues on some phones and it turns out that the little spring inside the phone is not raising the switch hook far enough to get dial tone. Try lifting it with your finger and see if you get dial tone.
Hello all,
I currently have a greeting only mailbox set up just as an information line for Spanish speaking parents at one of our campuses, however, they would like to have the option to set it up where you have a choice to hear the same info in English as well.
How would be the best way to...
BaccyNet,
I had some of the same issues after upgrading to Rel.7.1.
There is a command you can enter by hooking up to the maintenance port on the 3300 that turns fax detection off, however if the system reboots it will not keep the settings and you have to repeat.
Command: T2eFaxDetOff()
This...
MitelGuy, I found Article ID# 04-5191-00003.Is this the document you were referring to?
I may not have given enough info in my first post. All calls to this ext. are from internal extensions. All of my extensions are DID numbers. When any extension calls the emergency phone it displays the DID...
Hello all,
I have a phone set up that is used for an emergency phone. It is setup to cfwa to a cell phone. Is there a way to make the forwarded number display on the cell phone instead of the number that is calling the emergency phone so that the person it is forwarded to knows that it is from...
Have you tried a re-boot on the OPS server. I have gotten the same error before "internal error occured" when trying to add an entry or any other action I tried and after a re-boot it starts working fine. I have had this error several times and a re-boot seems to always fix whatever the problem is.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.