Search results for query: *

*BLFDP SORRY

THAT ONLY SHOWS BOARD REVISION STATE, NO DEVICES ARE SHOWN.. I NEED TO SEE IF THERE ARE ANY PHYSICAL CONNECTIONS , WASNT SURE IF bldp WAS AN OPTION OR A BETTER WAY TO SEE THIS

is there a command line on Md110 BC12 that will display if devices are connected to EL28 and EL29 boards? many thanks

Hi can anyone confirm if gamma sip trunks connect to panasonic ncp500 without any issue. Gamma now require registration and media strem to be on 2 separate external addresses and i just wonder if panasonic ncp500 is compatible with this??

teenu3, hope this helps if you haven't resolved it yet: cmd 1023 set to 67 cmd 1804 set to 1 in cmd 2220 enter the the full telephone number that is a prefix of the ddi cmd 2224 set to unknown or national cmd 2260 is the ddi table that needs to be populated for all of above to work.. so eg...

hope this helps for now !! The codes I would need to parse (for now) are; 25 If the synchronization between the LIM and the GSM clock is faulty, (or between two LIMs in two LIM without group switch) SLIP will occur on the PCM line and the supervision program is informed. ADD INFO 1: 0 =...

OAS is v6.0.4. Every 10 minutes OAS loses connection to the MD110 (MXONE TSW SP7. The first entry in event log is that a connection to Applink has failed followed by all service accesses reporting to be down. This recovers within 1 minute with everything being back in service only to go through...

have you assigned THE port on the NIU?? IOEQI:IODEV=TELNET1,EQU=1-0-70-4,USAGE=MML,AUTH=7,TYPE=NETWORK;

CNLIP:LIM=ALL,DEV=YES; or CNBIP:LIM=ALL,EXTDEV=NO; for board revisions/board name etc.

we have several installs of BP250 R12 using Oak without any problems

guys, is it possible to bridge 2 x D-Link DSL-2640R together. my problem is i cannot run any cable to a room for internet access and we have a D-Link DSL-2640R already working and a spare D-Link DSL-2640R?? appreciate any info...

never seen that product before, looks very good..thanks for the info

Reply, service advice below released for 4223 phones, doesnt really help anyone ... we have same issue that displays become faulty on phones and also key D lights up and phone will not operate anymore... 2007-10-12 - Extended warranty period on DBC 223 and DBC 222 with quality issues...

Tarikou, enable cmd 1915 and 1918 see if that helps

a star for you, thanks very much for the info, MDEVO

Ian, hope this helps a little, any other input appreciated: the 6 centrex lines on the PBX are not serving any purpose unless you have other sites with some centrex lines also and this reason would be for simple call transfer etc...if you dont i would suggect these are ceased and converted to...

should have paid more attention sorry Rauliz for my wrong info....

Hi rauliz, 2 things to try, Block's position equ with the BLEQI Wait until the position is locked, and restart the board. or restart PU ELP6 in the Lim the extn is hosted. MDEVO

Phrankie have you just recently upgraded the switch???

thanks i will try that