Search results for query: *

You have to go to the signaling server to activate that feature. If you don't want to use an external server to host the call log and personal directories you can choose the sig serv to hold it. You have to put the elan IP address of the signaling server.

If you have OTM you can do a global change on the TN's and transmit them to the new PBX.

After MRT YES you have to tell which music route to use. If you have an 81C you will need one music trk member in every network group unless you have the liscence for broadcast music.

Voice mail light will light up as long as it's on key 0 or a unique dn.

Just noticed it was OPT81C. Change that to dual pri? Msdl? MSDl daughterboard? QPC720?

Is this the 1st PRI in the PBX? Make sure the LDN number is assigned. If not you will not recieve external calls. Are you using a tmdi card? Are you using a downloadable dchi or msdl daughterboard? What problem were you having? Did the dchannel come up? Did you put a loop back on the circuit? We...

Make sure your elan connections are all connected to a switch not a hub. Do you have all your IP phones on a seperate vlan, isolated from data. Did you check all your switch configs?

Have you tried Ld 17 Req chg Type cequ SUPC X60 Did you have this in programming then did an upgrade to succession?

With the new CP4 cards you back up to a compact flash. Do you need one in each drive? If you do an EDD and there is no removeable flash, the system does a backup and says no removeable media device to backup to. Ive seen some schedule commands but haven't tried it. Since these CPU's don't switch...

Is this an AC or DC PBX? Are all of your CSU's connected to the rectifier or UPS? Sometimes the demark requires power, is it connected to a UPS? Could be your CSU's are connected to a non UPS outlet.