Search results for query: *

Have a look at the line cord socket on the bottom of the phone. If this socket is white then you will have a potential fault with leaking capacitors. At times the phones can be repaired by changing the caps and giving the pcb a clean. I find on most occasions the phone is no good and needs...

Not had much to do with door phones. It might be worth putting a new post on the group to ask about installing the door phone and door opener on this system. I'm sure someone out there will have the answer your looking for. However if it is a unit that runs on an analogue port you should be...

do a search on google for norstar manager software. one of the results at the top will be for nortels site. I can't remember the name of the site but this should get you the results you are after. If it doesn't just let me know and I'll have a look for you.

The ata2 units do pass cli to the handsets. I would try a different handset. If the fault is still there, then I think you may have an intermittent fault with your ata unit.

Do you mean analogue (slt) telephones? If you do you need to get your hands on an ATA module. If you have a compact plus system then it has one ata built in.

Erad is easy to use. Just download nru 10 from nortel. When you run the software and connect to the erad, your pc displays a 7310 phone for programming. This can be changed to a 7324. Connecting lines. If you are using an 8*24 system you have 8 lines built in. If all 8 are used up you will need...

Just been experimenting with an erad Go into programming terminals & extensions, press show enter extension number of rad press show then next until compatibilities press show then next until you see something which offers a chance to change the phone type. The display should read 7310. press...