Search results for query: *

the netgear mr814 has at least three versions these notes are from .v3 (the white case) with wireless antennae logon to the router in the advanced section on the left hand list -first- open the Lan IP Setup page default setting is checked Use Router as DHCP Server default starting ip...

hi linney, thanks for the reply. yes, we saw that thread and browsed thru most of it. maybe the question should have been, what conditions on an xp pro workstation, that is the remote target of an rdp session, will cause the rdp client, to not be able to redirect it's...

thanks for the reply. we dont think of this as a printer issue, but an os issue but if this question is better suited to the printer forum, please advise. the printer works on the pc to which it is attached (pc1 in the original post), and thru redirection, on many...

hp lj1100 appears everywhere we test, will not appear on the one pc on which it is needed to appear. some lazy definitions follow: pc1 = xp pro sp2 with hp laserjet 1100 (ms) local lpt1 pc2 = xp pro sp2 with hp laserjet 1300 pcl6 local lpt1 printer redirects = local lj1100 appears on remote...

anyone solved the asus a8n-vm csm sata ii ncq problem? asus a8n-vm csm has nvidia 430 chipset, which appears to allow ncq on sata drives that have the ncq feature, on other motherboards. this is a single sata drive, not a raid configuration. asus says that setup must have only ncq or raid but...

hi onthe asus a8n-vm csm do you find that ncq (command queue) is enabled for the drive? device manager> ids ata/atapi controller select nvidia mcp51 sata (which ever one the drive is attached checked boxws: let bios select transfer enable read cache enable write cache grayed enable...

card is: nt7b75aaaf dip switch bank has 9 switches. all 9 are set to off. (away from the edge connector) flip switch #7 to ON ? which manual / page for this card and switch settings?

can the link transfer be used for call forwarding, to remedy the low volume issue that appears with call forwarding? see thread799-1189968

lines are analog gain was set to FarCO for all lines additional info -- calling and routing thru to the answered cell phone: caller can hear the cell phone without issue cell phone can barely hear the caller. if cell phone rolls to voice mail. caller hears cell phone voice mail attendant...

automatic call forwarding to a cell phone. volume is too low to be able to understand the caller. when the call passes to the cell phone voicemail, retrieving that voicemail volume is also to low to hear. already set the volume to high on the nortel switch