Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Kainfs

    Cisco Works not e-mailing alerts

    Hi, I've managed to get the e-mail alerts working now. It turned out that the devices had not been selected in the appropriate message filter in RME>Tools>Syslog>Message Filters. Thanks guys for your ideas and help Kind Regards
  2. Kainfs

    Cisco Works not e-mailing alerts

    Hi Martin I've checked the device credentials and they all look fine. However, i'm not quite sure how i go about checking to see whether the sysloganalyser process is running? Where would i find this information? Regards
  3. Kainfs

    Cisco Works not e-mailing alerts

    Hi Nigel, I've ran a syslog report through RME and it says there are no records! Not quite sure what i'm doing wrong. I've delted and added the switches back in Campus Manager, added the entries into the local host file. Regards
  4. Kainfs

    Cisco Works not e-mailing alerts

    Hi Nigel, I've checked the syslog.log and can confirm that it is receiving the sys log messages e.g. Apr 10 11:39:28 10.0.200.1 53: 2d21h: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address ****.****.**** on port FastEthernet2/0/1. Apr 10 11:39:28...
  5. Kainfs

    Hostnames Problem

    Hi Nigel, Thanks, that solved the problem and the ip_addresses have been resolved to hostnames. Thanks once again
  6. Kainfs

    Hostnames Problem

    Hi, After adding an object (i.e. cisco 3750 switch)into my submap I've defined a label for the switch, defined a selection name, and then entered the ip address and hostname (e.g. test-sw) details in the IP Map window. However, once this is done and established if I right clcik and choose...
  7. Kainfs

    Cisco Works not e-mailing alerts

    Hi, I've checked the config for the working switch and the non-working switch and they are virtually identical. They both have the line: logging trap debugging logging <ip-address of LMS> In answer to your question: there are no firewalls between the switches and LMS server...
  8. Kainfs

    Cisco Works not e-mailing alerts

    Hi, I'm running CiscoWorks LMS 2.5 which sends e-mail alerts from some devices but not others. Typical e-mail alerts include Config changes and port security violations. On checking the syslog messages reports in 'Device Centre>Device selector' it seems as if the devices are not sending the...
  9. Kainfs

    Writing new CLID tables

    Correct Boberator. In my case it was some legality issue which stopped me from presenting any number of my choice. I didn't want to get into the politics of it all so I just accepted it and settled for the carriers number having to be displayed.
  10. Kainfs

    Connection issue with 3750

    I've actually diagnosed the problem to a faulty sfp port on our 6500. I tried a different sfp port on another card and hey presto! it worked. I should have tried that first before posting!!! However, i tried other ports on the same card (i.e. 3,4, 7 & 9) all of which didn't work but I have...
  11. Kainfs

    Connection issue with 3750

    Hi, I've configure a catalyst 3750 (see config below) with a vtp trunking port (int gig 1/0/1) which links up to a 6500. I get link lights on the interfaces on the 3750 and 6500 but I can't seem to do anything else from or to the 3750 i.e. pings, telnet sessions. I've set the vtp domain to...
  12. Kainfs

    Configuring VACL's

    Hi All, I've set up a set of VACL and maps for several VLAN's e.g. vlan filter my_mapA 2,3,4 vlan filter my_mapB 5,6,7 but I have a problem. From what i've read I know that VLANS must be unique to a single map. However in the above example I require VLAN 7 (10.7.0.0 for example) to be able to...
  13. Kainfs

    Writing new CLID tables

    Thanks everyone for your great posts. I finally managed to create my own CLID table. However, I tried to put an arbitrary number in the HLCL field (e.g.11111111) and did 'key 0 scr {DN} 2' (where 2 is my new CLID table). When I dialled out externally instead of 11111111 appearing my main...
  14. Kainfs

    Writing new CLID tables

    Hi, Can anyone please help. I was messing about with my CLID tables and on the INTL field I entered 0. Previously it didn't have any value. How do i get rid of this 0. I tried entering 'nul' but this didn't work! Regards
  15. Kainfs

    Writing new CLID tables

    I tried creating a new CLID table (i.e. CLID table 3) in ld 15 but i'm getting a SCH0111 error.(see below) If I do a return after CLID i get to ISDN. At this point I stopped as I was scared I might erase the existing clid tables. If I do further carriage returns will a new CLID table be built...
  16. Kainfs

    Writing new CLID tables

    Hi All, I'd like to create a new CLID table to allow certain DN's to show an alternative number when they make external calls. However, I don't really know how to create new tables to achieve my objective. Can anyone provide me with details on how I do this? Many Thanks
  17. Kainfs

    Dial 9 for Outside Line

    When using hotdial I get constant dial tone even when pressing further digits.
  18. Kainfs

    Dial 9 for Outside Line

    Hi folks, I've a third party device which uses a analogue line to dial an external server (on the PSTN) and dump information to it. Currently, it dials without the prefix 9 and hence cannot get an outside line. I want to avoid the situation of having to call out the third party maintainer to...
  19. Kainfs

    Automating changes to DN templates

    Hi, I use VT220-OTM 2.0 to make changes to DN's e.g. changing NCOS values. However, i was wandering how I could make the same change to a range of DN's(extensions) without having to go through each DN individually and then changing the NCOS value. I suppose what I need is a macro type function...

Part and Inventory Search

Back
Top