Search results for query: *

I have purchased an Auth Code to upgrade a BCM 400 from 3.7 to 4.0. I do not have access to the KRS system at Avaya. Can someone help me retrieve the keycode for the BCM upgrade. Thanks

Hi, Can someone explain to me the steps taken to network an existing mics and cics for basic ext to ext dialing on a internal lan. I have the gateways setup on both systems using 4 trunk lines on each. How do I setup the pbx's in terms of pool's, DN's, DID, Access codes. I can at the moment...

I was wondering if someone could have a look at my configuration and tell me what I'm doing wrong. I'm trying to network a mics and cics system with nortel voip gateway's and not having much luck on getting it to work. I created a line pool B for 4 trunk lines on one LS/DS card connected to a...

Hi, I have a norstar voip gateway and after reading through the instructions. I was wondering if I can use "digital" station ports rather than "analog" station ports for connectivity or do I need to convert to analog.

Thanks for the information, what I discovered to be wrong was I didn't have the gateway IP assigned to the internal pc only a fixed IP without the gateway. Thats why I could ping it no problem from the pix but it wouldn't connect.

I've been trying to gain access from a remote location with pcanywhere and cannot seem to get it to work. Can anyone see from my config what the problem may be? I have googled around for a few hours and thought I may ask here. Pix external IP is one assigned by DHCP x.x.x.x Pix internal IP is...

I have a Norstar mics 4.0 using mck extenders. The problem I'm having with the remote M7208 Handsets (6 in all) is they will randomly have no dial tone and the only way to get them working again is by resetting the port on the branch office extender and then that phone may work for 5 minutes or...

Thank you for that information, I also found the previous post about paging here. www.tek-tips.com/viewthread.cfm?qid=897044

I have MCK extenders corporate/branch office. What I'm looking for is a solution to extend loudspeaker paging to the branch location as well. Has anyone come across any solutions to do this? I'm using a Norstar MICS in the corporate office. The only thing I have found so far is a Valcom...

Can anyone tell me if this will work on nortel? MCK PBXgateway E-GWY2-SLM24 and if not what would it take to make it work. Can I just upload the nortel software image to make it a gateway compatible with nortel?

I'm running a wireless 802.11g at a data rate of about 50Mbps RX/TX. If I were to use the extenders would I still require the LS/DS and E&M Cards.

From reading in some of the other post's they mention LS/DS cards are these something I would require as well and is this phone system fairly easy to setup, I cannot seem to find any manuals or examples of what I'm trying to acheive. I am really new to this phone stuff, most of my experience...

I have two offices interconnected by wireless routers and the main office running a norstar mics system and the second office with a norstar compact. Are there gateway's available to hook up to the phone systems to tie both offices together over a bridged eoip network and would I need poe? Is...