External paging over ip 3

[bobby333]

I have MCK extenders corporate/branch office. What I'm looking for is a solution to extend loudspeaker paging to the branch location as well. Has anyone come across any solutions to do this? I'm using a Norstar MICS in the corporate office. The only thing I have found so far is a Valcom VIP-800 Audio port.

Thank you in advance for any info.

 

[dhnl]

Bogen has a similar product which appears to be based on Multitech's VOIP gateways.

If you wanted to accomplish this on the cheap you could wire something like this directly to a spare set at the remote office:

http://www.algosolutions.com/mainpage.php?id=2

 

[oliver60]

Valcom

http://www.valcom.com

has a solution.

 

[jerryreeve]

If you have a spare port on the Extenders just put a 7100 set on it assigned to the correct page zone and come out the speaker leads back into the PA Amp.

there was an earlier discussion on this about 1-2 years ago on this forum.

----------------------------
JerryReeve
Communications Systems Int'l
com-sys.com

 

[bobby333]

Thank you for that information, I also found the previous post about paging here.

http://www.tek-tips.com/viewthread.cfm?qid=897044