Search results for query: *

Have any body tried PatchLink to manage Sun patches. If answer is yes can you tell me is it worth looking into this product.

What is Sun’s recommendation about patch management on Sun boxes (sol10,9 and 8). How admins are doing it in the market (companies) Thx inadvance

How can I set the following premissions on the file.. -r-sr-x--- thx

I just jumped this system with sol10. The disk size is 18G and I have partitiot the / as 5g, /var 4g, /opt free and swap as 7G....but I donot know why swap shows 18G when I do df -h or df -k. From the format command the partition table shows swap size 7G...

I have just got a Sun Ultra 2 machine with Solaris 8. I connected it to my dell router, which I have been using with my windows machines without any problem. What do I need to do to access the sun machine from any of the windows machine on the local network using telnet or ssh.

It is sol8, I also tried on another machine that is running sol10, same problem. The only way I get coredump on sol8 machine is STOP-A AND THEN OK>SYNC.

[ernie:root] dumpadm Dump content: kernel pages Dump device: /dev/md/dsk/d2 (swap) Savecore directory: /var/crash/ernie Savecore enabled: yes [ernie:root] savecore -v -d savecore: bad magic number 0 [ernie:root] savecore -L savecore: dedicated dump device required

I checked /var/crash/ernie and there is not core files. I can do stop A and sync ...and it will does write under /var/crash/ernie. but right now when I do savecore -v .it shows........ [ernie:root] savecore -v savecore: dump already processed.........I donot now where it is or some body deleted...

[ernie:root] dumpadm Dump content: kernel pages Dump device: /dev/md/dsk/d2 (swap) Savecore directory: /var/crash/ernie Savecore enabled: yes [ernie:root] savecore -v savecore: dump already processed how can I get coredump?

I spoke to Sun and they are says that install 116369-10

I just check, We have four v440 machines and all 4 machines are getting the same disk errors.

These are internal disks.

First we start getting these messages in /var/adm/messages, Then replaced the HD, but again same error. then HD's backplane changed...again same message about sd2 and now I also see same messages for sd1 and sd4, mostly I get error messages for sd2 every 2 hours and this HD has been replaced...

since when solaris start adding there own ssh pkg in OS root@tboxa1# uname -a SunOS tboxa1 5.9 Generic_118558-11 sun4u sparc SUNW,Ultra-80 root@tboxa1# cat /etc/release Solaris 9 9/05 s9s_u8wos_05 SPARC Copyright 2005 Sun Microsystems, Inc. All Rights...

We have one jumpstart server, but we need one more for different location, If I make a tar ball of the jumpstart files and ftp to the new machine....can I build new jumpstat server this way.

Thanks!huebs ...there was a typo in vfstab file.....

root@putla3# df -k Filesystem kbytes used avail capacity Mounted on /dev/md/dsk/d0 8218349 1865429 6270737 23% / /proc 0 0 0 0% /proc mnttab 0 0 0 0% /etc/mnttab fd...

partition> p Current partition table (original): Total disk cylinders available: 18412 + 2 (reserved cylinders) Part Tag Flag Cylinders Size Blocks 0 root wm 0 - 273 128.44MB (274/0/0) 263040 1 swap wu 274 - 547...

would it be metainit d1 1 2 /dev/dsk/c1t2d0s1 /dev/dsk/c1t3d0s1 OR metainit d1 2 1 /dev/dsk/c1t2d0s1 1 /dev/dsk/c1t3d0s1

I have never used disksuite defore, hence I need some help: I have two disk 72.gb each, I want to create 120 GB file system..like /logs ...root syetem in on the another drive and I donot wana mirror root at this point...pls can you helep me ans give the step how to combine two disk and create...