Search results for query: *

Thanks for the suggestions and bringing out some concerns. I'll see what i can do to satisfy the customer's requirements. Thanks again.

Well, more than likely, most phones will have a body sitting at them, and never reach that magical 200 ring sweet spot.

Just because a phone registers does not mean someone is actually sitting at the phone, and i do want the inbound call answered.

It appears the "alias" might be limited to qty 50, so this may not work for more than fifty phones. Trying to find confirmation on this limit.

Have phones 2001,2002,2003 in SRST mode in a router. Calls coming into the system from PSTN should hit 2001, then 2002, then 2003, and so on....and loop back thru again possibly... Where 5551212001 is an example DNIS delivered on trunk. no huntstop alias 1 5551212001 to 2001 preference 1...

I should clarify that i meant ring the first phone, then ring the second phone, and so on. Not actually ring all 10 phones at once.

Can SRST be configured to provide ring-group/hunt-group to ring all registered phones until the first person answers? Lets say 10 phones regisered during SRST. Phones are internal extensions only, non-DID. Inbound TFN trunk into gateway. When inbound calls hit gateway via TFN, how can i...

I finally found a reports manual. http://support.avaya.com/elmodocs2/comm_mgr/r1_3/cd823_3/233505_5/233505_5.pdf

using this command: list measurements ip dsp-resource detail 1 today-peak; What do the acronyms In Reg Peg and Out of Reg Peg stand for? and how do i interpret if the numbers are good or bad for instance: Lets say Region 1 has 2240 DSP resources(7 mr320), In Reg Peg shows 2472, Out of Reg Peg...

The TN2302 is really a TN2602AP Medpro MR320, which appears capable of handling 320 calls according to this webpage. http://www.avaya.com/gcm/master-usa/en-us/products/offers/g650_media_gateways.htm

Does a dsp calculator exist to figure out how many medpro boards are required to handle a given audio load? Lets assume the following: G.729 across wan TN2302 Medpro has 32 dsp resoures using g729 No fax or other call types used 250 simultaneous calls are in progress Main site...

I found a document Avaya 555-245-600 page 173 Table 31. I'm guessing based on my calculation below that 1 medpro is sufficient. Would like to know if i'm calcuating this correctly. Minutes of traffic in the hour = number of calls x duration Minutes of traffic in the hour = 250 x 5 Minutes of...

Does a dsp calculator exist to figure out how many medpro boards are required to handle a given audio load? Lets assume the following: G.729 across wan TN2302 Medpro has 32 dsp resoures using g729 No fax or other call types used 250 simultaneous calls are in progress Main site...

What is the maximum string length for dhcp option 176 that the 46xx series phones can receive/handle that is returned from a dhcp server? 127 characters?, 255 characters? Is the limit imposed by the dhcp server being used(aix,windows) or the firmware of the phone, or both?