using this command: list measurements ip dsp-resource detail 1 today-peak; What do the acronyms In Reg Peg and Out of Reg Peg stand for? and how do i interpret if the numbers are good or bad for instance: Lets say Region 1 has 2240 DSP resources(7 mr320), In Reg Peg shows 2472, Out of Reg Peg shows 0; so if i only have 2240 dsp resources, should i be worried that the number In Reg Peg 2472 is higher?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
inter-PN cals on s8710 ip-connect
- Thread starter jwhite4
- Start date
- Status
Similar threads
- Locked
- Question